230V Triac dimmer/receiver ZigBee, max. 400W, Push Dim

Small Zigbee 230V TRIAC receiver for wireless or push dim control of TRIAC dimmable power supplies, also in combination with e.g. Philips Hue bridge, 1 channel, maximum output 400W. For led lights and led transformers max. 200W output. Does not need a neutral wire to work, in this new model two wires are enough. Multiple pushbuttons can be connected behind a single pushbutton switch, e.g. in a living room a group of 6 lamps can have up to 3 pushbutton switches.

The compact ZigBee 3.0 compatible TRIAC receiver works for wireless ZigBee control of TRIAC dimmable power supplies and push dim control. The receiver is used to connect luminaires or LED strips with TRIAC dimmable power supply. The luminaires can thus be controlled wirelessly by remote or wall-mounted controllers and Zigbee-enabled devices, and if desired, also by fixed spring-activated switches.

The required wireless Zigbee remote control or push dim button is purchased separately. Connected to 230V i.e. primary side, disconnects power from power supply. A standard 230VAC Triac reel controller is not suitable for connection, i.e. it is omitted from the connection or bypassed. The device also supports the PUSH DIM feature. To use the PUSH DIM feature, please purchase the necessary buttons from your preferred supplier (not wireless). They are not included in our range.

The receiver can be paired with wireless dimmers and controllers up to 30pcs. One receiver can be controlled by several different dimmers or controllers wirelessly, even from different rooms.

In addition to wireless control, an unlimited number of spring-return switches can be connected to the receiver.

1. Zigbee network for compatibility with Philips Hue, among others

2. The push-button dimmer works simultaneously with Philips Hue, among others. All you need is an inexpensive pushbutton switch e.g. ABB Jussi. As a push-button dimmer, this dimmer can be installed behind the push-button in a standard-sized box or, if you prefer, next to the luminaire. The push button dimmer does not need 0 wires to work, two wires are sufficient.

3. Also works as an on/off switch and simultaneously with e.g. Philips Hue. All you need is a simple on-off switch. With an On-Off switch, this dimmer can be installed behind the switch in a standard size box or next to the first lamp. On-off does not need 0 wire to work, two wires are sufficient.

See here for installation instructions

Key features

• AC phase cut-off with ZigBee control and dimming function
• Safe and reliable complete isolation technology
• 100-240VAC input and 100-240VAC output
• 1 channel, max 400W output (LEDs max 200W)
• Triac dimmable and Mosfet dimmable
• Rear edge dimming
• Compatible with Zigbee remote controls and controllers
• Innovative minimum brightness adjustment function
• Dimming and switching of individual colours to dimmable LED-lamps, traditional incandescent lamps and halogen lights
• Input and output with screws, safe and reliable
• Small size, easy to install in a junction box
• Dimensions: 45.5 x 45.5 x 20.3mm.
• Operating temperature: -20 +50°C
• Protection class: IP20