RGB+CCT LED strips
RGB+CCT in LED tape In addition to multicolored (ie Red, Green, Blue), there is also a color temperature adjustment, including both a warm white 2700k and a cold white 6000K LED. In addition to all colors, you can also adjust the color temperature from cold to white infinitely, and the dimming works, of course. Most versatile LED strip, with all adjustment options.
RGB+CCT The ribbons are 12mm wide and dimmable and cut off, depending on the strip, every 5-10cm to a suitable size. If you want to illuminate the corner of the corner, or two adjacent walls, it would be easiest to feed the ribbons from the corner in two directions, you can connect the cables of both strips to the same receiver. RGB+CCT The ribbons are almost unlimited, for example Smart LED 2.4g with a series of light controllers or Zigbee with light controllers (can also be connected to the Philips Hue system). If you want dotless light, we recommend LEDto -profile Square or Line20 our profiles. You need RGB+CCT In addition to the ribbon, the profile you install the tape to get a neat installation, 24v LED-In transformer (e.g. 5M for installation 20W/m 24v RGB+CCT tape 120W 24V power supply, because 5m x 20W/m = 100W and the transformer should be a little bigger than this.) In addition, you need a light controller, for example we recommend receiver and to that controller eg wall control or remote control. These light control products are 2.4g of our series And very easy to use and directly combined with voice control, such as Amazon Alexa or Google Assistant.
