4in1 LED receiver RF WiFi 4-channel. CCT LED-12-36V 4x5A

RF WiFi wireless receiver with four channels (4x5A) mainly for use in CCT i.e. colour temperature adjustable LED-light strips. Also suitable for monochrome DIM, tunable white CCT, RGB and RGBW 12V-36V LED-tapes. Control is via the same RF WiFi series of button/roller controllers. The dimmer is compatible with all products in our RF WiFi series.

 

RF WiFi wireless LED-dimmer/receiver, RGBW and temperature adjustable (CCT) with four channels 4x5A

Receiver with push-button, roller control and dimmer/colour temperature control CCT / RGBW colour adjustment is infinitely variable.

 

The receiver is mounted on the power supply and LED-tape, i.e. control is from the secondary side. The power supply does not need to be dimmable. Operating distance max. 20m. Wide adjustment range of light output 0.1%-100%.

 

Power max. 4 x 5A, i.e. each channel can be connected to a maximum of 5A. All channels of this receiver work simultaneously, i.e. if you connect e.g. 4 monochrome ribbons, you can connect 4 x 5A ribbons, but they all work at the same time.. If you want to control the tapes at different times in different groups then you need more receivers.

 

Connecting a receiver to work with a remote control or button:

 

 

• Connect to LED strip Connect the receiver to

 

• Turn on the button/roll control by removing the protection between the radiator and the button/roll control, then the control starts working

 

• Activate the button/roll control by pressing the ON button and press the receiver's Learning key-button on the receiver. Immediately afterwards, press one of the channel (1-4) buttons or the button of the button selector on the reel switch

 

• The connection is complete when LEDthe :s flash

 

One receiver can be controlled by more than one button (max. 8 buttons), if you want to control the light from both doorways of a room.

 

It offers not only a smooth brightness dimming function, but also an accurate colour temperature and RGB-control with PWM output. Multiple zones can be controlled individually or synchronously with the standard receivers in each zone. Built-in dimming patterns are available and stored even when the lights are turned off. The brightness of each R, G, B, W channel can be individually adjusted to achieve millions of colors. When working with WiFi RF converters, the RF receiver can be controlled via a WiFi converter that can be installed on IOS or Android devices.

 

Features

 

 

• 4-channel standard voltage RF LED -controller available from 12-36VDC and max. 5A per 4 channels

 

• Enabled by RGB- and tunable whiten (warm white and cold white) LED-with the receiver of the lighting in pairing RGB- and CCT-with remote control

 

• Also supports mono-chrome, bicolour, RGB- and RGBW-LED-lighting when paired with the corresponding remote or wall-mounted fixture

 

• Full compatibility with a wide range of mono, dual, colour, RGB / RGBW- and RGB + CCT with RF cables

 

• Multiple zones can be controlled individually or synchronously with standard receivers in each zone

 

• Each receiver can be controlled by eight different controllers simultaneously

 

• Can be WiFi controlled with a WiFI converter installed on IOS or Android mobile devices 

 

• The brightness of each R, G, B and W can be adjusted to achieve millions of colours

 

• Radio frequency: 869.5/434/916.5MHz

 

Decoupling of receiver and button/roller controller:

 

 

• Press the learning key button for 5 seconds.

 

Operating voltage: 12-36V DC.

 

Power: max. 4 x 5A.

 

Operating temperature: -20°C ...+50°C

 

Protection class: IP20

 

Dimensions: 178 x 46 x 22mm

 

178 mm, 178 x 178 mm, 178 x 178 mm

 

Requires button, remote or roller control to operate.

 

Read here controller user manual.