9.6W/m 24V dotless COB LED strip 5m, 900lm/m CRI >90 IP20 480led/m

Excellent value for money dotless 9,6W/m 24V COB LED strip, with a high CRI >90 and a luminous efficacy of ~900lm/m. Suitable for indoor use IP20 COB LED strip is 8mm wide and 5m long, with one metre of soldered pre-soldered tape at each end. cables. LED-The light colour of the strip can be chosen from four options: either very warm white 2700K, warm white 3000K, neutral white 4000K or cold white 6500K.

LED-The bottom of the strip has a 3M adhesive tape to secure the strip to its base, and LED strip can be easily cut with scissors to the appropriate length at 5cm intervals. This LED strip is extremely versatile and is ideal for a wide range of lighting applications in dry interiors such as wall decorations, bookshelves, stair rail lighting or in the bedroom behind the bed headboard - also suitable for use in the kitchen for task lighting and plinth lighting or as an indirect light over kitchen cupboards towards the ceiling.

Affordable dotless 9,6W/m 24V COB LED strip with good light output ~900lm/m

dotless COB LED strip can be installed very close to the ceiling or wall surface or diffuser and the light emitted by the individual LEDs of the strip light is not "pinpointed", but always uniform and pleasant. LED strip can be shortened/cut every 5cm at the copper pins with scissors. LEDThe ribbon has pre-soldered 1m long wires at each end, so you can easily make a direct connection. LED-The strip can be used as two separate lighting strips. In addition, you can use 8mm COB strip connectors, i.e. SLIM 8mm COB strip-strip-connector between two COB for connecting two LED strip lights, SLIM 8mm COB strip-wires connector for connecting a new supply cable to the strip.

• The product is tested in approved laboratories and the high quality of the light meets EU requirements for indoor lighting.
• We recommend LED-additional cooling of the strip, e.g. LED-profile. In addition LED-profile for a cleaner installation and protection LED-tape from shocks, dust, etc.
• RECOMMENDED LED-PROFILES - This strip is 8mm wide so will fit all profiles. Our most affordable surface mount profile is 14,4mm x 7mm. Begton12, which is well suited for basic lighting. Also available at PINTA10 profile and even with the smallest MINI8 our profile makes installation super easy! Our flush-mounted equivalent profiles are the most affordable basic profile Begtin12 as well as for example. URA10 profile. About the angular PT45 profile, KAAPPI12 and CULM10 profiles will also give a completely even and clean result with this pointless LED-tape.
• CONTRACT power supply - You need LED-In addition to the tape, you need at least a 24V standard power supply. If you use the full 5 meters LED-tape then 5 x 9,6W = 48W so we recommend this 75W 24V standard power supply! If you install 2 complete reels of tape, i.e. 10m (10m x 9,6W/m = 96W), the following is suitable power supply for example 120W 24V constant voltage power supply.
• LONG TERM DIMINATION - Above 24V basic transformers are also fine if you want to dim the tape with wireless dimmers like this inexpensive Easy RF roll dimmer and receiver. This tape also works great with our RF WiFi series, which looks like a standard wall controller. Surface mount wireless glass-backed roller controller and RF WiFi 12-24V receiver, which allows the wireless controller to control the LED strip.
• DIMMING WITH TRADITIONAL WALL DIMMERS - If you want to dim the strip with traditional wall dimmers such as transistor or TRIAC dimmers, choose the TRIAC dimmable strip dimmer. power supply i.e. for example for a 3m length LED-for a 3m strip 40W 24V TRIAC dimmable power supply and size for 5m coil 75W 24V TRIAC power supply.

• 3-year manufacturer's warranty (Average life 36000 h)

Declarations of conformity: CE & RoHS

CE CE and RoHS. operating temperature -20º - +45º

Product manufactured using LEDtested to 6000h requirement according to LM-80.