DT8 DALI PRO 12-36V dimmer/controller for monochrome LEDs, CCT i.e. tunable white LEDs and RGBW multicolour LEDs with four channels (4x5A) and compatible 12-36V LED-lamps. All channels operate from a single DALI address, which can be manually set from the Master device or selected from the controller. DALI Slave device compatible with standard Master devices in the DALI system that support DT8 commands.
You can also control this controller with a PUSH DIM, a spring-return switch! You can also control the colour temperature and RGBWcolour control is possible with a PUSH DIM switch on this controller (in this case DALI is not enabled, but PUSH DIM mode). A short press on the spring-loaded switch is ON/OFF, a long press is dimmer/brighter and a double-click on the switch switches the controller to either colour or colour temperature control, after which a long press again allows you to change the colour temperature/colours.

DALI-2 DT8 PRO RGBW and CCT dimmer/controller, four channels 4x5A 12-36V

12-36V constant voltage monochrome LEDs, colour temperature adjustable LED-strips and RGBW LED-DT8 DALI LED-Dimming controller (Slave) with 4 channels x 5A, operating with one DALI address. For monochrome strips, you can set the mode with the controller to have 4 separate channels. The controller complies with the latest IEC 62386-209:2011 standards and supports DT8 device commands. 1 DALI address to control 4 channels together. DT8 commands allow easy colour temperature adjustment between warm white and cool white. The DALI address can be manually set and displayed on the digital display. 1 DALI address available for all channels, i.e. two DALI addresses are available for this controller. CCT-strip can be connected to this controller. 0% -100% uniform dimming with DALI dimmer via logarithmic dimming.

DALI dimmer features

• TUV CE certified
• DALI-2 certified
• Dual Color DT8 DALI dimmer and colour temperature control and RGBW
• Complies with the latest IEC 62386-209:2011 standards
• 4 channels controlled via a single DALI address
• Colour temperature control DT8, colour Tc. according to DALI specifications.
• Colour control as defined in the DALI specification for device type 8, colour type Tc.
• Compatible with universal DALI master controllers supporting DT8 commands
• DALI address can be manually assigned and displayed on digital display and is configurable via DALI software tool and DALI USB interface

The DALI receiver is installed between the power supply and the LED-tape, i.e. control is from the secondary side. The power supply does not therefore need to be DALI dimmable. Operating distance max. 20m. Wide adjustment range of light output 0.1%-100%.

Power max. 4 x 5A i.e. for e.g. two tunable whitefor two LED-tape

DALI dimmers and DALI controllers can control multiple zones or groups and record different lighting situations. Our DALI controllers, which follow the standard DALI protocol, are compatible with DALI products from other international companies.

The controller offers smooth brightness dimming control. Built-in dimming patterns are available and are saved even if the lights are switched off or a power failure cuts the power.

Operating voltage: 12-36V DC.

Power: max. 4 x 5A, 240-720W depending on operating voltage.

Operating temperature: -20°C ...+50°C

Protection class: IP20

Dimensions: 170 x 53 x 28mm

170 x 170 mm, 170 x 170 mm, 170 x 170 mm Dimensions: 170 x 170 mm

See the product brochure downloadable from above for a user guide and instructions.