DIN rail LED-Receiver RF WiFi 4-channel. DIM, CCT, RGB, RGBW 12-36V 4x5A

RF WiFi wireless receiver for DIn-rail with four channels (4x5A) for single-colour LEDs, RGB and RGBW 12V-36V LED-tapes. Control is via the same RF WiFi series of button/roller controllers. The dimmer is compatible with all products in our RF WiFi series.

LEDThe SR-1009din is a DIN rail mounted RF receiver compatible with our RF WiFi series of remote controls and standard voltage single colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi-colour LEDs, bi LED-lights and RGBW-LEDs. Several zones can be controlled individually or synchronously with the standard receivers in each zone. Built-in change patterns are available and can be stored for each zone. The brightness of each R, G, B, W channel can be individually adjusted to achieve millions of variable colours. With the addition of a WiFi RF converter to the system, the lights can be controlled via APP installed on IOS or Android devices.

Key features

• DIN-rail mountable RF DIM, CCT, RGB / RGBW LED -controller
• Continuous voltage
• Full compatibility with RF Wifi series remote controls and other controllers
• Multiple zones can be controlled individually or synchronously with standard receivers in each zone
• Each receiver can be controlled at eight different distances for maximum control
• Can be WiFi controlled from an App installed on IOS or Android mobile devices at the same time, when using an RF WiFi converter
• The brightness of each R, G, B and W can be adjusted to achieve millions of colors
• Radio frequency available: 869.5/434/916.5MHz
• Dimensions: 106 x 53 x 98mm

 

Connecting the receiver to work with a remote control or button:

• Connect LED strip Connect the receiver to
• Turn on the button/roll control by removing the protection between the radiator and the button/roll control, then it will start working
• Activate the button/roll control by pressing the ON button and press the receiver's Learning key-button on the receiver. Immediately afterwards, press one of the channel (1-4) buttons or the button of the button selector on the reel switch
• The connection is complete when LEDthe :s flash

One receiver can be controlled by more than one button (max. 8 buttons), if you want to control the light from both doorways of a room.

It offers not only a smooth brightness dimming function but also an accurate colour temperature and RGB-control with PWM output. Multiple zones can be controlled individually or synchronously with the standard receivers in each zone. Built-in dimming patterns are available and stored even when the lights are turned off. The brightness of each R, G, B, W channel can be individually adjusted to achieve millions of colors. When working with WiFi RF converters, the RF receiver can be controlled via a WiFi converter that can be installed on IOS or Android devices.

Disconnect the receiver and the button/roller controller:

• Press the learning key button for 5 seconds.

Operating voltage: 12-36V DC.

Power: max. 4 x 5A.

Operating temperature: -20°C ...+50°C

Protection class: IP20

3 years warranty

Requires button, remote or roller control to operate.