MONI30-01 ISO LED-profile, surface-mounted low model

Large surface mountable LED-profile, low model. Measures 33.4 x 12.8mm, meaning that up to three LED strips can be mounted in parallel on this profile for efficient lighting. Versatile, available in three shades and with a wide range of accessories.
MONI30-01 profile set - we have collected all the accessories related and compatible with this profile on one page, click here to view and select products!

MONI30-01 profile

Large size, wide and low surface mountable LED-profile

The MONI30 profile series is a wide range of large profiles and accessories, with 7 different profiles, 7 different covers, i.e. 4 cover models in various shades, and a variety of fasteners. All MONI30 profiles are compatible with D9, E9, C9 and A9 diffusers.

The MONI30-01 profile can be used as such as a wide surface mounted luminaire, easily accommodating up to three LED strips in parallel, if required, over a width of 30mm. This allows to achieve efficient lighting performance easily and with good cooling of the LED strips. Available in several deck options, straight sliding design A9 cover, click C9 cover and curved big D9 cover and square big E9 cover.

MONI30-01 is also suitable for use as a suspended profile, as well as for co-installation MONI30-08 transformer housing where MONI30-01 and MONI30-08 together form a luminaire. This makes for spectacular pendant luminaires in your own dimensions or multifunctional profile luminaires, see pictures!

The profile can also be combined with a transformer box to create a higher profile. MONI30-02 and side illuminating MONI30-03 profile, countless possibilities for lighting solutions!

Applications

• Furniture
• Linear lighting
• Pendant luminaires
• Exhibition lighting
• Office lighting

Features

• for up to three 8mm LED tape, space 31,4mm LED-for 31.4 mm tape. It is of course possible to use only one strip, e.g. 8mm, if a wide profile is desired, e.g. for corridors, but we recommend two strips of at least 120led/m in parallel, e.g. 9,6W/m 24V ribbon.. Even with one strip the spots are not very noticeable, but as the strip width is only about 8mm the sides of the diffuser will be a bit darker than the middle, i.e. in the shadow. The 9,6W/m 24V ribbon is also available in a practical 50m reel for long runs without loose ends (this is a basic ribbon, however, so the power supply to the ribbon should be at 5m - max 10m intervals and preferably at both ends). In addition, we have a practical 9,6W/m 24V 20m reel CC tape, which allows you to make up to 20m of pulling tape with a single power supply. If the luminaire is to be used in the bathroom, a moisture-proof version is also available. IP65 9,6W/m 24V NANO IP-LED strip.
• size 33,4mm x 12,8mm, length 2m

Accessories

• Diffusers D9, E9, C9 and A9
• Fixing clip T and Y adjustable and Y with conical hole
• T-connector block for fixing two profiles together
• PERUS16 list sliding back for fixing
• Main parts, i.e. end pieces
• Suspension ropes with tension, if installed as a pendant luminaire. In black, white and grey.
• Basic pendant wires, if installed as a pendant luminaire
• Transformer box, can be used for surface mounting and pendant mounting, hides the transformer
• cover for pendant mounting, when hanging a profile only
• cover for pendant mounting, when a transformer box is also used
• Hinge brackets for wall mounting, pivoting

Installation

• mounting clip
• screw
• double-sided tape
• mounting adhesive
• suspension wire

MONI30-01 profile set - we have collected all accessories related and compatible with this profile on one page, click here to view and select products!