MONI30-01 ISO LED profile, surface-mounted low model

Large surface-mounted LED profile, low model. Dimensions 33.4 x 12.8mm, that is, up to three LED strips can be installed in this profile in parallel to provide effective light. Multi -purpose, available in three shades and with a variety of accessories.
MONI30-01 profile set - We have collected all of this profile and compatible accessories for one page, Click to see and choose products here!

MONI30-01 profile

Large, wide and shallow surface-mounted LED profile

The MONA30 profile set is a wide profile model for large profiles and accessories with 7 different profiles, seven different lid, or four cover models in many shades and different fasteners. All Mon30 profiles are compatible with D9, E9, C9 and A9 diffusers.

The MONA30-01 profile can be used as such as a wide surface mounted luminaire that can easily accommodate three LED strips in parallel to 30mm wide. This allows you to easily achieve efficient lighting power and cool the LED strips well. Available in a number of deck options, a straight -shaped slide A9 cover, click C9 lid as well as curved big D9 lid and square shaped large E9 cover.

MON30-01 is also suitable for use as a dependent profile and for joint installation MONI30-08 transformer case With Mon30-01 and MON30-08 form a luminaire. This gives impressive pendant lights in their own dimensions or diverse profile lights, see pictures!

Profile can also be combined with a transformer case to a higher MONI30-02 as well as to the side of an enlightening MONI30-03 profile, countless opportunities for lighting solutions!

Apps

• Furniture
• Linear lighting
• Pendant
• Fair
• Office lighting

Characteristics

• Up to three 8mm LED tape, order 31.4mm for LED strip. Of course, only one 8mm ribbon can also be used if we want a wide profile for eg corridors, but we recommend two at least 120lled/m ribbons in parallel eg. 9.6W/m 24v ribbon. Even with one ribbon, the points are not much in itself, but since the width of the tape is only about 8mm, the sides of the diffuser remain slightly darker than the so -called. in the shadow. 9.6W/m 24v ribbon is also available with a practical 50m reel for long strokes without waste (but this is a base tape, that is, the power supplies should be 5m - max 10m and preferably at each end. In addition, our champion is practical 9.6W/m 24v 20m reel CC tapeto make a tape up to 20m with one power supply. If the luminaire is coming to the bathroom, moisture protected is also available IP65 9.6W/M 24V Nano IP-LED tape.
• size 33.4mm x 12.8mm, length 2m

Accessories

• Diffusers D9, E9, C9 and A9
• Attachment clip T and Y adjustable mixed Y in the cone hole
• T-joint To attach two profiles to each other
• Basic16 a list of rear sliding to an attachment
• The end parts or end pieces
• Dependencies with tension, if installed as a pendant luminaire. Black, white and gray in colors.
• Basic dependent cables, if installed as a pendant luminaire
• Transformer case, can be used for surface installation and dependent, hide the transformer
• Cover for a hanging installation, when a dependent on a mere profile
• Cover for a hanging installation, when using a transformer case also
• Hinge holders for wall mounting, turn around

Installation

• attachment clip
• screw
• double-sided tape
• mounting glue
• pendant

MONI30-01 profile set - We have collected all of this profile and compatible accessories for one page, Click to see and choose products here!