RGB+CCT LED strips

RGB+CCT LED strips offer the ultimate in lighting control, combining vibrant red, green and blue LEDs with tunable white from warm 2000K or 2700K to cool 6500K. This 5-in-1 design lets you create any colour scene or adjust the white tone to suit your mood or task, all with smooth dimming.

How to choose your RGB+CCT strip

  • Power: 18W/m or 20–24W/m for brighter output
  • IP rating: IP20 for indoor use, NANO IP65 or IP67 for bathrooms, kitchens and outdoor applications
  • LED type: CSP dotless or dense-LED versions for even illumination
  • White range: 2000K–6500K or 2500K–6500K depending on the model

All strips run on 24V and come in 5-metre reels. Pair with a compatible RGB+CCT controller and LED driver for full control of colour, white tone and brightness.

4 products

Filter
LUMI LED

RGB+CCT LED strip 18W/m 24V, CSP dotless, 5m reel, NANO IP65

★★★★★ 5,0 / 5,0
€119,00
€119,00
LUMI LED

RGB+CCT LED strip 18W/m 24V, CSP high density LED, 5m reel, IP20

★★★★★ 5,0 / 5,0
€99,90
€99,90
AKTO LED

RGB+CCT 5 in 1 LED strip 24W/m 24V RGB+2700K-6500K IP20 5m reel

★★★★★ 5,0 / 5,0
€139,00
€139,00
AKTO LED

RGB + CCT - 5 in 1 LED strip 5m - 24W/m 24V RGB+2000K-6500K

€139,00
€139,00


RGB+CCT The ribbons are 12mm wide and dimmable and cut off, depending on the strip, every 5-10cm to a suitable size. If you want to illuminate the corner of the corner, or two adjacent walls, it would be easiest to feed the ribbons from the corner in two directions, you can connect the cables of both strips to the same receiver. RGB+CCT The ribbons are almost unlimited, for example Smart LED 2.4g with a series of light controllers or Zigbee with light controllers (can also be connected to the Philips Hue system). If you want dotless light, we recommend LEDto -profile Square or Line20 our profiles. You need RGB+CCT In addition to the ribbon, the profile you install the tape to get a neat installation, 24v LED-In transformer (e.g. 5M for installation 20W/m 24v RGB+CCT tape 120W 24V power supply, because 5m x 20W/m = 100W and the transformer should be a little bigger than this.) In addition, you need a light controller, for example we recommend receiver and to that controller eg wall control or remote control. These light control products are 2.4g of our series And very easy to use and directly combined with voice control, such as Amazon Alexa or Google Assistant.