RGB + CCT - 5 in 1 LED strip 5m - 24W/m 24V RGB+2700K-6500K

2700K-6500K with white colour control RGB + CCT LED strip 24W 24V 5m coil, high quality and efficient multicolour riled + colour temperature control 2700K-6500K for white in one coil! IP20, for indoor use. Highly efficient RGB + CCT-strip for restaurants, event lighting, home ambient lighting, etc. LEDs RGB and warm and cold white, 60 LEDs per metre x 3. At one end, pre-soldered wires of about 10cm.

RGB + CCT LED strip - Super efficient and high quality RGB-with 2700K - 6500K colour and temperature control.

Powerful professional level 24W/m 24V RGB + CCT LED strip, i.e. multicolour LED strip with also colour temperature control in the same. LED-Ribbon with red, blue, green and warm white/cold white LEDs in one chip, from which millions of different shades of colour can be mixed in both colours and shades of white. RGB + CCT In addition to the multicolour LEDs, the strip also includes white LEDs, which allow you to easily implement basic lighting directly with colour temperature control. You can choose either a warm white 2700K or the most neutral white shade 6000K or any shade in between as the light tone of the white LED in use.

RGB+CCT LED-The strip is controlled by a variety of light control products. The easiest solution is Our 2.4G series  5 in 1 receiver combined with for example remote control or 1-piece wall controller or both 8-piece wall controller with pre-set programs for colour changing shades, a tilt wheel for adjusting the light tone and dimming. Also RGB + CCT LED-strips can be controlled by, for example, the DMX decoders.

In addition, our Zigbee range includes receiver and remote control and, for example a compact wall controller RGB + CCT for adjustment.

Also available in the RF WiFi series receiver and remote control 5 in 1 i.e. RGB + CCT for tapes.

For example, if you use the whole 5m tape for one destination, you can use a transformer such as. 150W 24V constant voltage transformer.

• Red: 86lm/m
• Green: 21lm/m
• Blue: 23lm/m
• White 2700-6000K: 534-580lm/m

Applications RGB + CCT LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGB + CCT LED-tape specifications

• Flexible drying space RGB + CCT LED strip i.e. multi-coloured LED strip, with additional colour temperature control
• Protection class: IP20
• Voltage: 24V DC DC, 24V DC DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 24W/metre
• Width: 12 mm
• Height: 2.2 mm
• Shade: RGB + CCT multicolour ribbon and tunable white 2700K-6500K
• LED Type: 5050 RGB SMD
• 60 led/m x 3 i.e. 6 x RGB, CW and WW LEDs / metre
• LED opening angle: 120°
• Dimmable and RGB + CCT controllable

RGB + CCT-Other information on the tape

• Operating environment: -25°...+65°C
• strip can be cut off every 10 cm (6 LEDs)
• The back of the tape is covered with 3M double-sided tape that sticks to almost anything
• Flexible, but not lateral
• Guaranteed for 5 years

RGBW +CCT light control:

• Light control requires RGB+CCT-The lights require a controller, for example a 2.4G series receiver and controller. All our 2.4G series controllers work with this tape!
• Color options RGB + CCT in the driver data. The main colours are red, green, blue and white and in addition to these you can get a mix of several colours and a colour temperature control for the white colour. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, if e.g. 7m RGB+CCT-tape is fed with power from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. a 10m length with each end having its own wires. 150W 24V transformers and receiverswhich work in sync and the result is good.