RGB + CCT - 5 in 1 LED strip 5m - 24W/m 24V RGB+2000K-6500K

With very wide 2000K-6500K white colour adjustment RGB + CCT LED strip 24W 24V 5m coil, high quality and efficient multicolour riled + colour temperature control 2000K-6500K for white in one coil! Exceptionally low colour temperature in white up to 2000K, you can also create a very warm candlelight-like lighting with this strip. IP20, for indoor use. Highly efficient RGB + CCT-strip for restaurants, event lighting, home mood lighting, etc. LEDs RGB and warm and cold white, 60 LEDs per metre x 3. At one end, pre-soldered wires of about 10cm.

RGB + CCT LED strip - Super efficient and high quality! Very wide white colour adjustment from 2000K to 6500K

Powerful professional level 24W/m 24V RGB + CCT LED strip, i.e. multicolour LED strip with also colour temperature control in the same. LED-Ribbon with red, blue, green and warm white/cold white LEDs in one chip, from which millions of different shades of colour can be mixed in both colours and shades of white. RGB + CCT In addition to the multicolour LEDs, the strip also includes white LEDs, which allow you to easily implement basic lighting directly with colour temperature control. You can choose to use the white LED in either a warm white shade of 2000K or the most neutral white shade of 6000K, or any shade in between.

RGB+CCT LED-The strip is controlled by a variety of light control products. The easiest solution is Our 2.4G series  5 in 1 receiver combined with for example remote control or 1-piece wall controller or both 8-piece wall controller with pre-set programs for colour changing shades, a tilt wheel for adjusting the light tone and dimming. Also RGB + CCT LED-strips can be controlled by, for example. DMX decoders.

In addition, our Zigbee range includes receiver and remote control and, for example a compact wall controller RGB + CCT for adjustment.

Also available in the RF WiFi series receiver and remote control 5 in 1 i.e. RGB + CCT for tapes.

For example, if you use the whole 5m tape for one destination, you can use a transformer such as. 150W 24V constant voltage transformer.

• Red: 86lm/m
• Green: 21lm/m
• Blue: 23lm/m
• White 2000-6000K: 528-580lm/m

Applications RGB + CCT LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Kodit
• For indirect mood lighting, etc.

RGB + CCT LED-tape specifications

• Flexible drying space RGB + CCT LED strip i.e. multi-coloured LED strip, with additional colour temperature control
• Protection class: IP20
• Voltage: 24V DC DC, 24V DC DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 24W/metre
• Width: 12 mm
• Height: 2.2 mm
• Shade: RGB + CCT multicolour ribbon and tunable white 2000K-6500K
• LED Type: 5050 RGB SMD
• 60 led/m x 3 i.e. 6 x RGB, CW and WW LEDs / metre
• LED opening angle: 120°
• Dimmable and RGB + CCT controllable

RGB + CCT-Other information on the tape

• Operating environment: -25°...+65°C
• strip can be cut off every 10 cm (6 LEDs)
• The back of the tape is covered with 3M double-sided tape that sticks to almost anything
• Flexible, but not lateral
• Guaranteed for 5 years

RGBW +CCT light control:

• Light control requires RGB+CCT-The lights require a controller, for example a 2.4G series receiver and controller. All our 2.4G series controllers work with this tape!
• Color options RGB + CCT in the driver data. The main colours are red, green, blue and white and in addition to these you can get a mix of several colours and a colour temperature control for the white colour. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, if e.g. 7m RGB+CCT-tape is fed with power from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. a 10m length with each end having its own wires. 150W 24V transformers and receiverswhich work in sync and the result is good.