Powerful and inexpensive LED controller to control and dim any 12-24V LED tape directly on your smartphone without a WiFi bridge etc. For monochrome LED strips, For color temperature controls for CCT LED lights, RGB for LED light strips and For rgbw tapes mixed RGB + CCT for LED strips! The LED controller is controlled with a remote, Via WiF to a smartphone or with a wall control (to be purchased separately). See all compatible controls. Also works with Amazon Alexa and Google Assistant. Here Link to the manual.

Smart LED 5 in 1 WiFi Controller for LED strips - Simon color ls, RGB, CCT, RGBW and RGB+CCT

An LED controller that allows you to control almost any ribbons from the Smart LED 2.4G series and you don't need any WiFi bridge separately, as the controller works directly with WiFi, but you can directly connect your smartphone to the controller!

Connect the Smart LED - 5 in 1 controller to Smart LED 2.4G to smartphone, Smart LED 2.4G - to the remote control, wall control or all controllers to control the lights. Also works directly with Amazon Alexa and Google Assistant through the App, so you can control the lighting with speech! The Smart LED 2.4G system may, if desired, have one thousand Smart LED smart lamps and LED controllers, and you can also combine LED strips and LEDs with your own receivers. Linked lights can be divided into four or eight regional groups, this controller supports both groups. Area groups, or zonet, can be, for example, a kitchen, living room, bedroom or separate ceiling lights for daylight and mood lighting for evening lighting.

This controller can be controlled wirelessly in RGB+CCT mode also DMX512 with wireless transmitter.

Instructions for pairing the controller and controller:

Turn off the electric control (by pulling the plug or turning off the lights from the light switch, for example) and re -ignite the electricity. As soon as the light lights up in the LED, press the on-the-button for 3 seconds within 3 seconds (if your control has multiple channels on the channel button to which you want that light in question). The lights flash as a sign of the joint.

The removal of mating - Turn off the lights again, ie the plug off, etc. Re-ignite, and immediately, when the light lights up, press the 5 times the on-button within 3 seconds. The lights flash as a sign of a successful joint removal.

Correct mode 5 in 1 in the controller:

Note! Once you have paired the controller and the controller, check that you have the right space on the receiver, otherwise the color adjustment will not work properly. You can see the space used in the recipient of the LED mark light on top of the receiver. You must choose the right mode by pressing the SET button several times to bring the right color to the light next to the SET button.

Monochrome LED strip: White LED

CCT LED strip: yellow indicator light

RGB LED tape: Red LED

RGBW LED strip: green indicator light

RGB+CCT LED strip: Blue LED

Smart controller