Powerful and inexpensive LED controller to control any 12-24V LED light tape! Fits For monochrome LED strips, For color temperature controls for CCT LED lights, RGB for LED light strips and For rgbw tapes mixed RGB + CCT for LED strips! The LED controller is controlled by a remote control, via WiF With the Wifi bridge or with a wall control (purchased separately). See all of this compatible controls.

Smart LED 5 in 1 Controller for LED strips - monochrome leds, RGB, CCT, RGBW and RGB+CCT

LED controller to control almost any ribbons from the Smart LED 2.4G series

Combine Smart LED - 5 in 1 controller with Smart LED 2.4G - WiFi base station, Smart LED 2.4G - remote control, wall control or all different controls to control the lights. The Smart LED 2.4G system may, if desired, have one thousand Smart LED smart lamps and LED controllers, and you can also combine LED strips and LEDs with your own receivers. Linked lights can be divided into four or eight regional groups, this controller supports both groups. Area groups, or zonet, can be, for example, a kitchen, living room, bedroom or separate ceiling lights for daylight and mood lighting for evening lighting.

This controller can be controlled wirelessly in RGB+CCT mode also DMX512 with wireless transmitter.

Very easy to connect to work with the remote control. Pair the controller and controller.

Instructions for pairing the controller and controller:

Turn off the electric control (by pulling the plug or turning off the lights from the light switch, for example) and re -ignite the electricity. As soon as the light lights up in the LED, press the on-the-button for 3 seconds within 3 seconds (if your control has multiple channels on the channel button to which you want that light in question). The lights flash as a sign of the joint.

The removal of mating - Turn off the lights again, ie the plug off, etc. Re-ignite, and immediately, when the light lights up, press the 5 times the on-button within 3 seconds. The lights flash as a sign of a successful joint removal.

Correct mode 5 in 1 in the controller:

Note! Once you have paired the controller and the controller, check that you have the right space on the receiver, otherwise the color adjustment will not work properly. You can see the space used in the recipient of the LED mark light on top of the receiver. The colors of the room are printed on the receiver, that is, depending on what kind of LED light tape you have in this receiver, you should choose the right mode by pressing the SET button several times to allow the right color to burn at the indicator light next to the SET button.

Monochrome LED strip: White LED

CCT LED strip: yellow indicator light

RGB LED tape: Red LED

RGBW LED strip: green indicator light

RGB+CCT LED strip: Blue LED

 

Smart controller