HOHDE12 DOWN LED-profile for lowered ceiling 2m

NEW! For downlighting of the ceiling LED-designed with strip, angled to the wall/downwards illuminating LED-aluminium strip, max. 12mm LED-tape. At LED-profile allows you to create elegant indirect lighting on a drop ceiling. Size 35.2mm x 28.6mm, length 2000mm. Colour of the profile is anodised aluminium (grey). Also available in end pieces as well as different diffuser options, i.e. clickable C diffuser and sliding A1 diffuser.
Also available with upward illumination from the same profile series HOHDE12 UP LED-profile.
HOHDE12 profile set - we have collected all accessories related and compatible with this profile on one page, click here to view and select products!

HOHDE12 DOWN profile

Oblique wall and downward illumination LEDprofile for a drop-down roof

Aluminium LED-profile, specially designed for lighting on a lowered roof LED-tape. The beautiful trim both finishes the plasterboard edge of the suspended ceiling and illuminates the downward facing wall. We recommend a distance of 5-15cm from the wall.

Gently downwards/sideways to the wall LED-The HOHDE12 DOWN aluminium profile is made of anodised aluminium with improved scratch resistance. The LED profile is perfect for restaurants, public interiors, but it is also a great addition to the suspended ceiling of homes, giving the wall/ceiling surface an innovative and subtle illumination.

The HOHDE12 DOWN aluminium profile is designed to finish the edge of a drop ceiling and to illuminate diagonally downwards/wall indirectly. LED-The profile can be installed on plasterboards with a thickness of 12.5 mm. The HOHDE12 DOWN aluminium profile has the characteristic that the profile design allows for a delicate oblique light glow on the wall. The profile can accommodate max. 12mm wide. LED-strips.

The overall dimensions and simple shape of the profile significantly extend the usability and design possibilities of the LED profile. The HOHDE 12 DOWN aluminium profile is installed using adhesive or mounting tape. In addition LED-The profile can be fixed to a suspended ceiling with screws. For perfect aesthetics LED-the profile of the strip can be finished with end pieces.

HOHDE12 DOWN LED-aluminium profile is also an excellent cooling element, allowing the LED-optimal heat dissipation from the strip. Above all, this solution creates better conditions for the diodes in the LED strip and significantly extends their lifetime. LED-aluminium profile for protection LED-The aluminium profile also provides excellent protection against mechanical damage and makes the assembly much more durable than gluing the LED strip directly to plasterboard.

The profile is also suitable for bathroom lighting when you choose LEDfor the strip is moisture-resistant LED-tape.

LED-tape selection for downlighting of the roof

For indirect LED lighting of a drop ceiling, it is advisable to choose an efficient LED strip, such as 18W/m 24V LED strip, since the indirectly reflected light from the wall is always proportional to frostedmpi than direct light. We also recommend installing a dimming LED-so that the indirect lighting also acts as mood lighting in the evening. If you want a fully dotless light, we recommend using a spotless COB LED-tape.

If you want a recessed ceiling for lighting tunable whiten CCT LED-tape or RGB+CCT multicoloured LED-tape, it works well as the profile can accommodate a maximum width of 12mm LED-ribbons. Adjustable LED-adjustable strips are a good choice as they can be used to create different atmospheres in a space - bright daylight during the day and moody light in the evening.

Choosing a diffuser cover

As the aluminium strip for indirect lighting is mounted to illuminate at an angle to the wall, it is possible to observe from certain angles LED-strip. It is therefore advisable to choose an opal diffuser diffuser, in addition to the dense leather LED-tape is recommended. We always recommend the use of a diffuser in profiles, otherwise LED-over the years the chute of the tape will collect dust in the chute, which is not easy to clean, and the dust will also heat up LED-This will reduce the lifetime of the LEDs. In our opinion, the best diffuser HOHDE12 list is diffuser C, as it spreads the light most evenly and is easy to click into place. Opal diffuser spreads the light evenly over a wide area and softens the edges of the light.

Applications for indirect lighting

• wall/sub-wall mounted, LED profile designed for LED strip lighting of a suspended ceiling
• homes, offices, public spaces, exhibition stands, shops

Features

• max. 12mm LED tape
• size 35,2mm x 28.6mm, length 2m
• suitable for 12,5mm plasterboard

Accessories

• diffuser A1: milk / frosted / transparent - soluble
• diffuser C: milk / transparent - clickable
• Main parts or end pieces
• 2 years warranty

Lowered roof LED-installation of the profile:

• Indirect lighting LED-The direct lighting profile is installed directly on the "top surface" of the lowered roof. You can fix the profile with mounting adhesive or tape, or by drilling a hole in the profile and fixing it with screws. If possible when fitting multiple mouldings, it is advisable to leave the diffuser seam in a different position to the profile seam, this will lock the profiles neatly together and the seam will be very unobtrusive.

You can read more about indirect lighting here.

HOHDE12 profile series - we have collected all accessories related and compatible with this profile on one page, click here to view and select products!