LED dimmer/receiver RF WiFi 1-channel 12-36V 1x8A

RF WiFi 12-24V wireless receiver with one channel (1x8A) single stripe LED-tapes. Requires this same RF WiFi series controller to work, multiple options in both remote controls and wall dimmers.
This receiver is therefore installed on the secondary side, i.e. between the transformer and the 12V or 24V LED-or 24V or 24V tape. Suitable for ON/OFF control and dimming of all monochrome LED-ribbons. Very easy to install - from transformer LED-the + and - wires coming from the strip are connected to the INPUT screw terminals on the receiver and the receiver is connected to the INPUT screw terminals on the receiver LEDthe + and - wires from the OUTPUT screw connectors to the -tape. The receiver and the controller are paired together by a simple push of a button on the receiver and touching the controller of your choice, and then you can control the LED-your ribbon from the wireless controller.
You can find all compatible remote controls, wall dimmers and desk dimmers in the list below, the most popular being surface mounted roller dimmer, 1. part 1 push button control and part 2 push-button control and the cheapest is a compact push-button controller.

RF WiFi wireless LED-dimmer/receiver 12-36V LED-for tapes and LED-lights, single channel 1x8A

The receiver works with a push-button control, with roller control and dimming is infinitely variable. Compatible with all controllers in our RF Wifi range.

The receiver is mounted between the power supply and LED-tape, i.e. control is from the secondary side. The power supply does not have to be and must not be dimmable, because this does not dimmer the transformer but power supply normally supplies power to this receiver and the receiver dims directly. LED-the tape. Operating distance max. 20m. Wide range of light intensity adjustment from 0.1% to 100%, i.e. dims down to the very bottom even the most powerful ones LED-strips. No flickering. Suitable transformers are for example constant voltage HELVAR transformers, you will find them in all sizes for both 12V and 24V tapes.

Power max. 1 x 8A so you can connect to this stick 12V LED-tape max 96W (8A x 12V = 96W) or alternatively 24V LED-ribbon max. 192W (8A x 27V = 192W)

Connecting the receiver i.e. pairing to work with a wireless remote control, wall controller or control knob:

• Connect LED strip to the receiver. The receiver is installed between the transformer and the LED-tape, i.e. between the transformer and the LEDthe + and - wires from the transformer to the -tape are connected to the INPUT screw terminals of the receiver and the receiver is connected to the LEDthe + and - wires to the -tape from the OUTPUT screw connectors.
• Prepare the knob/roller controller for use by removing the plastic cover on the back of the controller to protect the button battery, i.e. the plastic cover between the two, and then the controller/button will start working
• Activate the button/roller control by pressing the ON button and press the receiver Learning key-button on the receiver. Immediately afterwards, press one of the channel (1-4) buttons or the button on the button controller or rotate the controller.
• The connection is complete when LED:they are flashing - if you want to connect more than one receiver to the controller, press the LEARNING KEY button for each of them and rotate the scroll wheel of the selected controller or press the controller button, depending on the model

One such 12-24V receiver/dimmer can be controlled by several controllers of the same series (max. 8 controllers per receiver), if you want to control the light from both doorways of a room. So in this case you can buy several, if you want different controllers (as long as they are from the same RF WiFi series, see below for a list of controllers) and they all control the same LED strip. EXAMPLE: Kitchen worktop lighting for which a traditional A traditional wall control/roll dimmer and a traditional wall-mounted wall unit with a traditional wall-mounted wall-mounted wall unit desk controller on the worktop.

This receiver/dimmer provides smooth brightness dimming control with PWM output. Multiple zones can be controlled individually or synchronously with the standard receivers in each zone. Built-in dimming patterns are available and stored even when the lights are turned off. When operating with WiFi RF converters, the RF Wifi receiver can be controlled via a WiFi converter that can be installed on IOS or Android devices.

Features

• 1-channel constant voltage RF WiFi LED -controller available 12-36VDC and max. 8A 
• Supports monochrome LED-ribbons, if you also want to control e.g. the colour temperature of the ribbon, you need CCT tunable whiten LED-tape and a 4. channel receiver that supports CCT colour temperature control
• Multiple zones can be controlled individually or synchronously with the receivers in each zone
• Eight different controllers can control a receiver simultaneously, and one controller can control several receivers.
• WiFi can be controlled via WiFi converter with an app installed on IOS or Android mobile devices. So if you want to control LED-tapes also on your mobile phone via WiFi, you will need this WiFi Bridge, to which you can connect any of the products in this RF WiFi range to be controlled by your mobile phone.
• Radio frequency: 869.5 / 434 / 916.5MHz

Decoupling of receiver and button/roller controller:

• Press the learning key button on the receiver for more than 5 seconds.

Operating voltage: 12-36V DC.

Power: max. 1 x 8A.

Operating temperature: -20°C ...+50°C

Protection class: IP20

Dimensions: 37 x 97 x 20mm

3 years warranty

Requires RF WiFi series wireless button, remote or roller controller to work.