LED dimmer/roller rf wifi wireless, surface mounted with glass frame

Run RF WiFi wireless surface mounted roller adjuster for LED strips. Really easy to install and use - our favorite regulator from our collection, as it feels like an ordinary wall dimmer even though it is wireless! Surface mounted, ie the button battery (change time 3-5V) and can be attached to the desired location with the included tape or screws.
Compatible with this receiver: 12-24V receiver/dimmer for LED strips That is, this receiver is fastened with simple screw connectors between the LED tape and the transformer to the secondary side, the devices are paired to work together by pressing one button and then you can turn off and light the lights with this wireless roller control and roll the roller control knob by twisting/brightening the lights.

Surface-mounted rotary LED dimmer, roller rf

Compatible eg. Rf wifi set of dimmer/receiver With which you can get 8A front LED ribbon or 12V LED strip max 96W or 24V LED tape up to max. 192W. If you want this more tape to be dimmed, you can use a bigger one 4. Channel 4x8A - 12-24V receiver, where you can catch a 4x8A ribbon/channel, for example, a 24V monochrome LED strip 196W for each four channels (4x196W). Thus, this 4th channel receiver allows larger amounts of monochrome tape attached, but all the tape attached to the same receiver will always work at the same time, ie if you want to control different tape at different times, you will need more receivers.

230V receiver/dimmer Suitable for triac dimmable transformers and, for example, dimmable 230V LED lamps such as E27, GU10 or triac dimmable 230V LEDs.

The roller controller acts as a normal/off switch by pressing the roll and rotating the roll as a dimmer. Color white, stylish glass frame. Installed on a wall or furniture. Easy as a retrofit, as wiring for the roller control does not come at all but works in the battery. Includes stylish glass frames, but also suitable for Exxact series frames.

The receivers can be paired with several controls (a total of 8 different controls/receiver).

• Action distance about 20m

• IP20

• Works with a 3V battery (CR2450), duration of about 3-5v, battery included. The battery can be changed.

• Frequency 868MHz

• can be paired with multiple receivers

• White background, frame of glass, knob aluminum

• size 86 x 86mm, height with a knob 26.9mm, frame height 10mm

Compatible RF WiFi series receivers for this wireless control:

Monochrome dimmable LED strips

• 12-24V for dimmable monochrome LED strips (max. 96W 12V LED or 192W 24V LED): LED receiver 1 x 8A LED receiver 12-36V-RF WIFI
• If you install more LED strips, up to 5pcs x 120W 24V LED tapes: 4 x 5A for monochrome LED strips rf wifi (Note!
• If you install more LED strips, up to 5 x 1192W 24V LED tapes: 4 x 8A for monochrome LED strips rf wifi (Note!

 

230V LED luminaires with transformers and LED lamps and bulbs such as E27, E14 etc.

• 230V triac dimmable LED luminaires and dimmable LED bulbs: 230V TRIAC HIMMENTER - RF WIFI
• 230V on/off relay for all kinds of LED luminaires: 230V is/of relay - rf wifi

 

Connecting the receiver to work with a remote control or a button control:

• Connect the LED strip to the receiver
• Use the button / remote control to remove the protection between the radiator, after which the control / button starts to work
• Activate the button/remote control on the button and press the receiver Learning Key-In button briefly. Immediately after the remote control of any channel (1-4) button or button control push button
• Connection is ready when LEDs flashes

One receiver can be controlled by several buttons (max. 8 buttons) if you want a light control from each doorway in the room.

Demolition of the receiver and button/remote control:

• Press the Learning Key button for 5 seconds.

Insists on receiver.

3 year warranty