ZigBee 4 in 1 LED-controller 12-48V 5-channel 5x8A DIM, RGBW, CCT or RGB+CCT LED-for tapes

Zigbee wireless 4 in 1 LED-controller for all types of LED strips with five channels (12-24V up to 5x8A (combined load max 20A for controller). You can control both monochrome, colour temperature adjustable, RGBW and RGB-CCT 5in1 strips. The colour mode can be selected by switches on the controller. Controlled by the same Zigbee series of controllers and via Zigbee network on a computer, phone or tablet. Requires a Zigbee hub such as Philips Hue or Amazon Echo Plus to work. Compatible with a wide range of Zigbee devices.

Zigbee 3.0 compatible wireless LED-controller, suitable for all types of LED strips, i.e. monochrome, RGBW, CCT or RGB+CCT - with five channels 12-24V 5x8A and mode selectable by switches

Compatible with Zigbee 3.0 system, this Zigbee lighting device can be connected to your Zigbee hub or other Zigbee-enabled bridges such as Amazon Echo plus or Philips Hue (check your device for compatibility). So if you want to control any LED strip with Philips Hue, this is a great fit.

The controller works with our Zigbee series remote control or other Zigbee products and the dimming & colour selection is infinitely variable. The controller can also be controlled via a Zigbee hub from a smartphone, computer or tablet.

The controller is installed on the power supply and LED-tape, i.e. control is from the secondary side. So the power supply does not need to be dimmable, the controller works with all 12-24V constant voltage monochrome, CCT, RGBW and RGB+CCT LED-tapes. Operating distance max. 30m between two devices. Wide range of light intensity adjustment from 0.1% to 100%.

Power for 12--24V led strips max. 5 x 8A i.e. each channel can be connected to a maximum of 8A (the whole controller can have a total of max. 20A), the controller can be directly connected to any kind of 12-24V led strips or lamps, colour mode is selected by switches i.e. the controller is set to operate with either single-colour led strips, RGBW, CCT or RGB+CCT-strips in the correct mode.

A single controller can be controlled by more than one button, for example if you want light control from both doorways in a room.

The controller offers smooth brightness dimming and colour control via PWM output. The lighting can be dimmed and the colour temperature can be adjusted. Multiple zones can be controlled individually or synchronously with the standard receivers in each zone. Built-in dimming patterns are available and are saved even when the lights are switched off.

Features

• 5-channel standard voltage Zigbee LED -controller available 12-24VDC and max. 8A per 5 channels
• Zigbee 2.4G RF technology, Zigbee DIM, CCT, RGBW and RGB+CCT lighting device, compatible with Zigbee Mesh network
• Compatibility: Zigbee Universal Gateway/Coordinator, Zigbee RGBW, CCT, DIM lighting controllers
• Enabled by LED-lighting control when the controller is connected to a Zigbee hub and with a Zigbee remote control/controller.
• Supports monochrome, RGBW and CCT LED-lighting (RGBWW, i.e. the colour of the light can be freely adjusted and selected). tunable whitethe desired shade of white from the strip)
• Can be controlled via Zigbee hub by smartphones, computer, etc. Connecting and disconnecting via Zigbee hub.
• Without connecting to the Zigbee hub, can directly connect to one Zigbee compatible controller. When connected to a Zigbee hub, 30 separate controllers can be used.
• Recording option for different scenes

Operating voltage: 12-48V DC.

Power: max. 5 x 8A or 480-960W depending on voltage, this is for 12-24V - however max 20A per controller in total.

Max 6A/channel for 36V and max 4A/channel for 48V, total max for the whole controller. 20A

Operating temperature: -20°C ...+50°C

Operating distance: <30m inside the building

Protection class: IP20

Dimensions: 59 x 170 x 29mm

170 x 170 mm, measuring 120 x 170 mm, with a 3-year warranty.

Requires a Zigbee remote or roller controller and a Zigbee hub if required.