24V standard voltage sources

Standard voltage sources or transformers For 24V LED strips and other 24v LED lights. Choose about 20-30% higher power supply than the need is if the power of the LED tape is eg. 18W/m 24v and the tape length will be 2M (18W x 2m = 36W), for example 50W 24V standard voltage power supply. The standard voltage source may also be higher than the power of + 20-30% of the LED tape, but not lower.



Basic converters work on/off, ie with a normal light switch, lighting and turning off LED-Ribbon. If you dim LED-Ribbon, this must be taken into account when choosing a standard voltage source. RF and RF WIFI for dimming also select 24v too basic transformer (For dimming occurs in the receiver transformer and LED-Between the ribbon, on the secondary side, the transformer itself is not usually dimmed). If you are dimming triac or 1-10v then select Triac or 1-10V standard voltage source. Traditional fixed wall mimics such as Shneider Exxact UN400LED Triac dimmable power supply. Dali with transformers In addition to Dali's control LED-for tapes. Outdoor use moisture protected LED-In transformers.