5in1 LED receiver RF WiFi 5-channel. RGB, RGBW, RGB+CCT 12-36V 5x5A

RF WiFi wireless receiver with five channels (5x5A) mainly for use with RGB, RGBW and RGB+CCT LED light strips. Of course, it is also suitable for monochrome, CCT color temperature control, RGB, RGBW and RGB+CCT 12V-36V LEDs. Control is done with the same RF WiFi series button/roller adjusters. The dimmer is compatible with all our RF WiFi series products.

 

RF Wireless LED Himmer/Receiver, RGB, RGBW and Temperature Transmission (CCT) & RGB+CCT with five channels 5x5A

The receiver operates with a button control, roller control and dimming / color temperature control CCT / RGBW Vibration control works infinitely.

 

The receiver is installed between the power supply and the LED tape, ie the control is on the secondary side. Thus, the power supply does not have to be dimmable. Running distance max. 20m. Extensive luminous efficiency adjustment range 0.1%-100%.

 

Power max. 5 x 5A, that is, a maximum of 5A can be connected to each channel. All channels of this receiver work at the same time, so if you connect 5 monochrome strips, for example, you can attach 5 x 5a strips, but they all work at the same time. If you want to control the ribbons at different times in different groups then you need more receivers.

 

Connecting the receiver to work with a remote control or button:

 

 

• Connect the LED strip to the receiver

 

• Use the button/roller adjustment by removing the protection between the radiator and then the control/button starts to work

 

• Activate the button/roller control on the button and press the receiver Learning Key-In button briefly. Immediately press from the roller control of a channel (1-4) button or buttonhole push button

 

• Connection is ready when LEDs flashes

 

One receiver can be controlled by several buttons (max. 8 buttons) if you want a light control from each doorway in the room.

 

It provides not only smooth dimming function but also with the exact color temperature and RGB color adjustment with PWM output. Multiple zones can be controlled separately or synchronously with standard receivers in each area. Built -in dimming models are available and are recorded even if the lights are turned off. The brightness of each R, G, B, W channel can be adjusted separately to achieve millions of colors. When working with WiFi RF converters, the RF receiver can be controlled through WiFi Konvert, which can be installed on iOS or Android devices.

 

Characteristics

 

 

• 5 channel with standard voltage RF LED controller 12-36VDC and max. 5A per 5-channel

 

• Allows RGB and color temperature control (warm white and cold white) LED lighting receiver while in pairing with the RGB and CCT Rock Controller

 

• Also supports the mono-chrome, two-color, RGB, RGBW and RGB+CCT LED lighting when pairing is equivalent to remote or wall mounting

 

• Full compatibility with many mono, two, color, rgb / rgbw and rgb + cct rf cables

 

• Several zones can be controlled separately or synchronously with the standard receivers of each area

 

• Each receiver can be controlled by eight different controllers at the same time

 

• Can be wifi control the WiFi converter with iOS or Android mobile-installed 

 

• The brightness of each r, g, b and w can be adjusted to achieve millions of colors

 

• Radio frequency: 869.5 / 434 / 916.5MHz

 

Demolition of the receiver and button/roller control:

 

 

• Press the Learning Key button for 5 seconds.

 

Operating voltage: 12-36V DC.

 

Power: max. 5 x 5a

 

Operating temperature: -20 ° C ...+50 ° C

 

Security Class: IP20

 

Dimensions: 59 x 170 x 29mm

 

3 year warranty

 

Requires a button or roller control.