LED-regulator/dimmer for monochrome LED-2-channel - ZigBee GREEN POWER
- - Products available with fast 1-3 days delivery. These products can be ordered with fast 1-3 days delivery. If you buy more products than we have in stock, the estimated delivery time will be backorder The estimated delivery time for products is approximately 2-4 weeks. - This product is currently out of stock and not available for order. You can ask our customer service by email what timeframe would be available in the future. - The product is currently not immediately available from our stock, but you can place an order and we will deliver the product to you as soon as it arrives. Estimated delivery time backorder The estimated delivery time for products is approximately 2-4 weeks.
SKU (product number):
SKU:SR-ZGP2801K4-DIM-G2
Zigbee 3.0 GREEN ENERGY compatible wireless 2-channel surface mount LED-regulator/dimmer for monochrome LED-ribbons and lights
Compatible with the Zigbee 3.0 system, this Zigbee lighting device can be connected directly to a zigbee controller (check your device for compatibility). GREEN POWER device meaning it doesn't need a separate battery but charges itself with each push of the button with enough energy to run without batteries.
Suitable for use with, for example DIM Zigbee controllers (2 pcs, i.e. one controller always works as one group, if you want to control two separate LED strips separately, you need separate controllers for each) or 230V Zigbee TRIAC dimmer with a Zigribe! A short press on the buttons will change the mode quickly, a long press will change it slowly. The controller connects directly to the Zigbee controller without any additional accessories, but if you want to control the lights with your mobile phone, you need a Zigbee bridge.
Instructions for use:
2 x ON/OFF buttons, multiple controllers can be installed on each of them
A short press on the OFF button turns the lights off, a long press dims the lights.
A short press on the ON button turns the lights on, a long press brightens the lights.
Features
- Controls ZIGBEE DIM strips and lamps, on/off and dimming, also works in dimming mode
- Supports monochrome DIM LED-luminaires (on/off and dimming)
- Can be controlled via Zigbee hub by smartphones, PC, etc. Connect and disconnect via Zigbee hub.
- Without connecting to the Zigbee hub, can directly connect to one Zigbee compatible controller. When connected to a Zigbee hub, 30 separate controllers can be used.
GREEN ENERGY device, works kinetically without batteries
Operating temperature: -20°C ...+50°C
Operating distance: <30m inside the building
Protection class: IP20
Dimensions: 81 x 81 x 13mm
2 years warranty
Requires a Zigbee receiver or Zigbee lights and, if required, a Zigbee hub such as Philips Hue bridge or Amazon Alexa Echo Plus.
How to connect
Connect FIRST LED-controller/receiver to the Philips Hue system (when you switch off the controller/receiver and switch it on again, the device goes into connection mode and by selecting "connect luminaire" in the Philips Hue system you can then connect it for 15 seconds).
When the controller is connected to the Philips Hue system, you can connect the Green Power controller directly to the controller. The Green power controller is not connected to the Philips Hue system itself, but directly controls the controller.
- From the LED strip controller/receiver, press the Prog button 4 times or switch the lights on again, e.g. by removing the plug from the socket 4 times. We recommend switching the lights on and off 4 times, it seems to work more efficiently here.
- Choose one button on the wall controller that you press, it doesn't matter which button, as long as it's the same all the time.
Press the same button for at least 7 seconds.
Press the same button briefly.
Press the same button for at least 7 seconds.
See if the lights flash twice. If not, press the same button again briefly and see if the lights flash. Repeat this until the lights finally flash, i.e. briefly press the same button and wait a few seconds to see if the lights flash. There are about 15 channels so you may have to press the button several times until the lights flash.
When the lights flash press another button which will stop the installation and now the lights will work from your controller!
Product categories where you can find this product:
Beautiful and easy
Kitchen lighting
You need a kitchen LED-for lighting LED-light strip, aluminium profiles and, in simpler versions, just the LED-transformer. You can also control the lights wirelessly with handy switches!
15W/m 24V COB LED strip 5m, 1400lm/m, CRI>90, IP20 544led/m
75W 24V LED power supply HELVAR, constant voltage
MINI wireless LED-wall controller black, dimming and CCT-K3S-B - Easy RF 2.4G
Easy and stylish
Sauna lighting
Is it time to renew your sauna lighting and brighten up your bath time? SAUNA LED-With our sauna lighting tape you can easily renew your sauna lighting.
SAUNA LED strip 5W/m 24V, IP65, max. 100°C - 2.5m reel
PINTA14.v2 LED-profile 2m (renewed model 2023)
MINI wireless LED-wall controller black, dimming and CCT-K3S-B - Easy RF 2.4G
Frequently asked questions
If you have any questions, our customer service will be happy to help you! In the meantime - are there any of these questions that you are wondering about?
How can I get help choosing products?
Our customer service will be happy to assist you with any questions you may have LED-about our products and orders. Send us more information about your destination and we will help you choose the right lighting solutions.
You can reach us by email asiakaspalvelu@valotehdas.fi or by phone 010 311 2830 or give us a tug on the sleeve in the chat at the bottom of the page!
How fast can I get my order?
We ALWAYS aim to dispatch all orders received before 13.00 on the same working day! The products are shipped from our Nummela store, so you can see the stock balances for all products in our warehouse in the online shop. The same products are therefore available for purchase both in our shop and in our online shop.
We send the products from our stock immediately on the day of ordering or at the latest on the next working day after ordering, so depending on the delivery method, delivery takes 1-3 days - even less.
Our products are delivered by Schenker and Matkahuolto. You can also pick up your order directly from our warehouse immediately after ordering.LED-We can deliver your order from our warehouse or our shop in Nummela.
Do you sell to both consumers and businesses?
We sell at LED-products both directly to consumers and wholesale to professional customers. LED-Our products are available for direct purchase both in our online shop and LED-our store in Nummela.
Can I come and see the products on site?
Yes! Light Factory LED-shop is located in Vihti Nummela, about half an hour from the capital region.
Our address: Ajurintie 2, Nummela.
We are open weekdays Mon-Fri 8-16.00.
Welcome to visit our products, design lighting and shop. You can get the products you want right away from our wide range of products in stock. We warmly welcome you to our serviced shop. LED-shop!
Miten löydän sopivan IP-luokan valaisimen?
Voit lukea IP-luokista lisää LED-valaisinten kosteussuoja- ja pölysuojaominaisuuksista eli IP-luokituksista eri tiloihin täällä: IP-luokitukset LED-valaisimille.
Miten asennan LED-nauhan?
Led-nauhan asentaminen on yleensä hyvin helppoa ja LED-nauhan kytkentä onnistuu ihan keneltä tahansa, tietyin tärkein rajoituksin. Ja varsinkin kun sinulla on oikeat tarvikkeet käytössäsi. Lue asennusohjeemme LED-nauhan asennukseen.