12V RGBW LED strip 5m - 19.2W/m 12V

RGBW LED strip 19,2W 12V 5m in a reel, high quality and efficient! IP20, for indoor use. Very efficient RGBW-strip for restaurants, event lighting, home ambient lighting, etc. LEDs RGBW-60 LEDs per metre in a single chip. At the other end, pre-soldered wires of about 10cm!
 

12V RGBW LED strip - high quality RGBW-strip

High quality 19,2W/m 12V RGBW LED strip, i.e. multicolour LED strip. LED-The ribbon has red, blue, green and white LEDs in one chip, which can be mixed in millions of different colours. RGBW In addition to the multicolour LEDs, the strip also features a white LED, which allows you to easily create basic lighting directly. You can choose either a warm white or the most neutral white shade for the white LED.

RGBW LED-The strip is controlled by various light control products. The easiest solution is Our RF WiFi series RGBW compatible receiver in combination with, for example a remote control, with pre-set programmes for colour changing shades, a tilt wheel for adjusting the light tone and dimming. In addition RGBW LED-strips can be controlled by, for example. DMX decoders.

In addition, our new Smart LED 2.4G is the affordable receiver and remote control and wall controller RGBW adjustment.

For example, if you are using the whole 5m tape for one object, the transformer can be used for example. 100W 12V constant voltage transformer.19,2W x 5m = 96W.

• Luminous flux red: 100-120 lm/m
• Luminous flux green: 250-270 lm/m
• Luminous flux blue: 90-110 lm/m
• White: (340-360lm/m depending on the option)

 

You can choose between two options for the white hue: a warm white hue and a neutral white hue. 

Warm white (2500-2700K) 340 lm/m

neutral white (4000-4500K) 360 lm/m

Applications RGBW LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGBW LED-tape specifications

• Flexible drying space RGBW LED strip i.e. multi-coloured LED strip
• Protection class: IP20
• Voltage: 12V DC DC, 12V DC DC voltage, so use standard 12V power supplies
• Full reel length: 5 meters
• Power: 19.2W / meter
• Width: 12 mm
• Height: 2.2 mm
• Shade: RGBW Multicolour ribbon
• LED type: 5050 RGBW SMD
• 60 led/m
• LED opening angle: 120°
• Dimmable and RGBW controllable

RGBW-Other information on the tape

• Operating environment: -25°...60°C
• strip can be switched off every 5 cm (3 LEDs)
• 3M double-sided tape on the back of the strip, which sticks to almost anything
• Flexible, but not lateral
• Comes with a 10cm extension piece to extend the tape.

RGBW light control:

• Light control requires RGBW-A controller, such as the RF WiFi series receiver and controller.
• RGBW-controls, see here
• Colour options RGBW in the driver information. The main colours are red, green, blue and white, with the possibility of mixing these with a wide range of colours. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, but if necessary RGBW with an amplifier the length of the installations can be increased without limit or if e.g. 7m RGBW-tape is powered from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. 10 lengths, with each end having its own 100W 12V transformers and receiverswhich work in sync and the result is good.