Affordable and versatile LED-profile for all kinds of LED-lighting! Surface mountable, 14.4mm x 6.6mm aluminium strip max. 12mm wide LED-strip. Great for LED-profile for kitchen partitions, bathrooms and indirect lighting in three colours.

Available as accessories end pieces and sliding cover i.e. J diffuser and click on cover C diffuser, in opal, black and clear. Fixing clips model S adjustable and S with conical hole are suitable for this profile. If you are joining two profiles together to form a longer assembly, you can achieve a tight fit by using clips at the joint and also by positioning the diffuser seam at a different point from the profile seam. This locks the profiles nicely into a straight, neat line.
Begton12- - we have collected all the accessories related and compatible with this profile on one page, click here to view and select products!

Begton12

Designed for surface mounting at low cost LED-profile in three colours

Begton12 profile fits LED-particularly well as a ribbon dotless COB LED-light ribbons such as for example dotless 9,6W/m 24V COB LED strip or if you want more efficient general lighting 15W/m 24V COB LED strip. Begton12 the profile can also accommodate dotless CCT i.e. tunable white 15W/m 24V LED strip, so you get a very chip tunable whiten luminaire easily. With this profile you can, for example, create a great indirect lighting for a bedside table by attaching LED-profile behind the bed headboard. You can direct the light either directly at the wall or up/side down behind the headboard. The profile is suitable for pointless COB LEDalso as an indirect lighting profile for use with non-focal strip lighting, e.g. in a ceiling/wall angle, thus creating a dotless, a uniform and very low profile of light, either on one wall of a room for accent lighting, or around different walls of a room.

Begton12 The profile is also well suited for under stairs for staircase lighting and under kitchen cabinets for plinth lighting. In plinths and staircases you can use either 9,6W/m 24V COB LED-tape or if LEDthe dots on the tape do not matter, because the tape is not visible from the plinth so low-powered 4,8W/m 24V 60led/m LED strip is also good for this kind of indirect "floor lighting".

Begton12 is also a good choice for cornice lighting, as it fits well between cornices, for example. Ovelus trim ceiling. Ovelus trim is often chosen as the profile for Begton12 black and the diffuser, i.e. the edge, can be either an opal diffuser or black C diffuser. When the black diffuser is used, when the light is off, the space between the cornice appears black so that the luminaire cannot be distinguished from the dark background colour of the cornice. Opal cover reduces the amount of light by 30% and black cover reduces the amount of light by 50%, so take this into account LED-when choosing the power of the strip light.

Applications:

• furniture, ceiling, wall, kitchen partition, staircases, cornice ceilings, bathroom, accent lighting

Features:

• max. Max. 12mm wide LED 12mm tape, but easiest to install on max 10mm tapes.
• size 14,4mm x 6,6mm
• aluminium strip length 2000mm

Accessories:

• diffuser J: milk / frosted / transparent
• NEW! Diffuser is now also available clickable C diffuser in OPAALI, BLACK and CLEAR and this combination with the clickable cover has its own curved design. end pieces available. For the C diffuser, choose the curved header design, as the C diffuser comes slightly higher than the sliding J diffuser and otherwise there will be a gap between the profile and the cover for the light.
• Mounting clip, type S adjustable and S clip with conical hole
• End fittings, i.e. end pieces for profile

Installation:

• fixing clip
• double-sided tape
• mounting adhesive

LED strip to be purchased separately, we recommend LED-tape with a minimum of 240led/m to hide the LED dots or dot-free COB LED-light ribbons.

Begton12-profile series - we have collected all accessories related and compatible with this profile on one page, click here to view and select products!