RF WiFi colour temperature control CCT remote control 6-channel.

6-channel dimmer/remote control to control your colour temperature controls LED-tapes. The dimmer control is compatible with all products in our RF WiFi range.

RF WiFi wireless CCT LED-remote control, colour temperature control and dimming on 6 different channels, i.e. 6 groups, plus 6 memory slots

6-channel remote control to control the colour temperature controls CCT LED-lighting strips. The channels can be controlled either together or separately - press 1 and 6 on the remote control to set the appropriate colour temperature and lighting level and then press, for example, memory location S1 to store this lighting setting in memory at location S1, then press S1 to activate the same lighting setting and then you can control both 1 and 6 channels at the same time.

An unlimited number of receivers can be paired for each channel. Each channel can have one Master Receiver. Set the first receiver to master mode, the others to slave mode. This way you can get all controllers to work in sync.

This wireless remote control is compatible with the RF WiFi series of receivers, receivers can be paired to control different channels of this remote control, either one or several. In addition, you can control dimming via wall controllers and WiFi system (requires RF WiFi converter) from a tablet or phone.

Connecting the receiver to work with the remote control or button:

• Connect to LED strip Connect the receiver to
• Turn on the button/roll control by removing the protection between the radiator and the button/roll control, then it will start working
• Press the receiver Learning key-button briefly. Immediately afterwards, press one of the buttons on the remote control for the channel (1-6) you want to connect the LEDs to and touch the dimming wheel.
• The connection is complete when LEDthe :lights flash

One receiver can be controlled by more than one button (max. 8 buttons), if you want to control the light from both doorways of a room.

Compatible RF WiFi series receivers for this controller:

tunable white CCT LED-

•  4 x 5A tunable white CCT LED-for RF WiFi tapes (NOTE! (all tapes installed in this receiver will work at the same time as one group)
•  4 x 8A tunable white CCT LED-for RF WiFi (NOTE! (all tapes installed in this receiver will work at the same time as one group)

Features

• 6 channels
• Dimming and colour temperature controlled by a dimming wheel with dimmer control
• Master control Master On/Off button for all channels
• 18 self-adjusted lighting scenes can be stored in memory, 3 lighting scenes for each channel
• Dimming and colour temperature control - channels can be adjusted together or separately
• 4 ready-to-use button dimming levels: 100%, 75%, 50%, 25%
• Indicator light shows if the remote is in battery saving mode or active.
• Reliable and reliable operation
• Dimming level 0,1-100%
• Operating distance approx.20m, works well through obstacles such as walls
• Lights switch on and off smoothly and gently
• Magnetic, elegant remote control stand included
• Batteries to be purchased separately: 3 x AAA
• Size: 140 x 48 x 17mm
• Operating temperature: -0°C ...+40°C
• Protection class: IP20
• This remote control can be used to control one or more receivers, unlimited number of receivers per remote control channel

Disconnection of the receiver and the button/roller controller:

• Press the learning key button for 5 seconds.

 

Press and hold the key for 5 seconds to activate or deactivate the remote control.

 

 

3-year warranty