RGBW LED strip 5m - 19.2W/m 24V, IP20

RGBW LED strip 19.2W 24V 5m in a reel, high quality and efficient! IP20, for indoor use. Highly efficient RGBW-strip for restaurants, event lighting, home ambient lighting, etc. LEDs RGBW-60 LEDs per metre in a single chip. Pre-soldered 1m long connecting wires at both ends! White light shade of your choice either 3000K warm white or 4000K neutral white.
 

RGBW LED strip - High quality RGBW-strip 19,2W/m 24V

High quality 19,2W/m 24V RGBW LED strip, i.e. multicolour LED strip. LED-The red, blue, green and white LEDs in one chip, which can be mixed in millions of different colours. RGBW In addition to the multicolour LEDs, the strip also features a white LED, which allows you to easily create basic lighting directly. You can choose either a warm white 3000K or the most neutral white shade 4000K for the white LED.

RGBW LED-The strip is controlled by a variety of light control products. The easiest solution is Our RF WiFi series RGBW compatible receiver in combination with, for example a remote control, with pre-set programmes for colour changing shades, a tilt wheel for adjusting the light tone and dimming. In addition RGBW LED-strips can be controlled by, for example. DMX decoders.

In addition, our new Smart LED 2.4G is the affordable receiver and remote control and wall controller RGBW adjustment.

For example, if you are using the whole 5m tape for one object, the transformer can be used for example. 120W 24V constant voltage transformer.19.2W x 5m = 96W.

• Luminous flux red: 85 lm/m
• Luminous flux green: 205 lm/m
• Luminous flux blue: 65 lm/m
• White: 410lm/m

 

You can choose between two options for the white hue: a warm white light hue and a neutral white light hue. 

Warm white (3000K)

neutral white (4000K)

Applications RGBW LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGBW LED-tape specifications

• Flexible drying space RGBW LED strip i.e. multi-coloured LED strip
• Protection class: IP20
• Voltage: 24V DC DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 19.2W / meter
• Width: 12 mm
• Height: 2.1 mm
• Shade: RGBW Multicolour ribbon
• LED type: 5050 RGBW SMD
• 60 led/m
• LED opening angle: 120°
• Dimmable and RGBW controllable

RGBW-Other information on the tape

• Operating environment: -25°...60°C
• strip can be cut off every 10 cm (6 LEDs)
• 3M double-sided adhesive tape on the back of the strip, which sticks to almost anything
• Flexible, but not lateral

RGBW light control:

• Light control requires RGBW-A controller, such as the RF WiFi series receiver and controller.
• RGBW-controls, see here
• Colour options RGBW in the driver information. The main colours are red, green, blue and white, with the possibility of mixing these with a wide range of colours. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, but if necessary RGBW with an amplifier the length of the installations can be increased without limit or if e.g. 7m RGBW-tape is powered from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. 10 lengths, with each end having its own 100W 24V transformers and receiverswhich work in sync and the result is good.