RGBW LED strip 5m - 23W/m 24V - high performance IP67 waterproof (discontinued product)

Waterproof IP67 RGBW LED strip 23W 24V 5m on a reel, high quality and efficient! Highly efficient RGBW-strip for spas, bathrooms, kitchenettes, restaurants, event lighting, home mood lighting, etc. LEDs RGBW-72 LEDs per metre in a single chip. At the other end, pre-soldered wires of about 10cm! Suitable profiles for this 15mm wide strip include. FIVE16, LINE20 and LAAJA24 LED-profiles. About the flush-mounted MONI30-06 and LINJA-UPPO20.
Discontinued model - new replacement product for this LED-light strip can be replaced by here.
 

IP67 waterproof RGBW LED strip - very efficient and high quality!

Powerful professional level 23W/m 24V RGBW LED strip for outdoor use as well as for humid areas, i.e. multicolour LED strip. LED-The ribbon has red, blue, green and white LEDs in one chip, which can be mixed in millions of different colours. RGBW In addition to the multicolour LEDs, the strip also includes a white LED, which allows you to easily create basic lighting directly. You can choose either a warm white or the most neutral white shade for the white LED.

RGBW LED-The strip is controlled by various light control products. The easiest solution is Our RF WiFi series RGBW compatible receiver in combination with, for example a remote control, with pre-set programmes for colour changing shades, a tilt wheel for adjusting the light tone and dimming. In addition RGBW LED-strips can be controlled by, for example. DMX decoders.

In addition, our new Smart LED 2.4G is the affordable receiver and remote control and surface-mounted, battery-powered: 1 part wall control, 4-piece wall-mounted controller and 8 part wall control RGBW for adjustment.

This IP67 RGBW-strip can fit into profiles, among other things: LINJA20, LINJA-UPPO20, MONI30-02, MONI30-05

For example, if you use the whole 5m tape for one destination, the transformer can be e.g. 120W 24V constant voltage transformer. Because even though the strip has a total of 23W x 5m = 115W, not all the LEDs in the strip will light up at the same time. RGBW LED-So even a slightly smaller one will do. power supply than is usually recommended, i.e. 20-30% more than the power requirement. Suitable for IP67 power supply can be found here 120W 24V IP67.

• Luminous flux red: 120-140 lm/m
• Luminous flux green: 300-320 lm/m
• Luminous flux blue: 110-130 lm/m
• White: (370-420lm/m depending on the option)

 

You can choose between two options for the white hue: a warm white hue and a neutral white hue. 

Warm white (2500-2700K) 370-390 lm/m

neutral white (4000-4500K) 400-420 lm/m

Applications RGBW LED-tape

Thanks to its IP67 water resistance rating, it is also suitable for use in spas, bathrooms and outdoors! For saunas, we recommend a maximum installation height of about 1 metre, i.e. suitable for installation under the ceiling and behind the backrest.

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGBW LED-tape specifications

• Flexible IP67 RGBW LED strip i.e. multicoloured LED strip
• Protection class: IP67
• Voltage: 24V DC DC, DC 24V DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 23W/metre
• Width: about 15 mm
• Height: 2.2 mm
• Colour: RGBW Multicolour ribbon
• LED type: 5050 RGBW SMD
• 72 led/m
• LED opening angle: 120°
• Dimmable and RGBW controllable

RGBW-Other information on the tape

• Operating environment: -25°...60°C
• strip can be cut off every 10 cm (6 LEDs)
• 3M double-sided adhesive tape on the back of the strip, which sticks to almost anything
• Flexible, but not lateral

RGBW light control:

• Light control requires RGBW-A controller, such as the RF WiFi series receiver and regulator.
• RGBW-controls, see here
• Colour options RGBW in the driver information. The main colours are red, green, blue and white, with the possibility of mixing these with a wide range of colours. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, but if necessary RGBW with an amplifier the length of the installations can be increased without limit or if e.g. 7m RGBW-tape is powered from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. 10 lengths, with each end having its own 100W 24V transformers and receiverswhich work in sync and the result is good. Note! For outdoor use also IP protected transformers!