20W/m 24v Cob LED LED ROOF 5M, 2000LM/M, CRI> 90, IP20 1088LED/M

Pointless or COB LED Lighting Novelty with two illuminating LED lines! A brilliant price-quality, efficiently illuminating 20W/m 24V COB LED light strip with high CRI> 90 and about ~ 2000lm/m. The IP20 COB LED strip suitable for indoor use is 12mm wide and 5m in length, with 100cm wanderings soldered at each end of the tape. The color of the light is as you choose either Warm white 3000K, neutral white 4000K or cold white 6500k.
The bottom of the LED tape has a 3M tape to attach the tape to its base and the LED light strip can be cut to a suitable size every 1.47cm. Suitable for a variety of lighting purposes in dry indoor indoors such as general lighting, work -lighting and efficient wall highlighting - also for use in the kitchen when you need highly efficient work -level lighting.
 

Powerful Disposeless 20W/M 24V COB LED Light Tape with very good light output ~ 2000lm/m

The LED tape can be installed very close to the roof or wall surface or diffuser, and the light of the individual LEDs on the individual LEDs is not detected, but the light is always flat and pleasant. The LED light tape can be reduced/cut every 1.47cm at intervals at the copper spaces with scissors. At both ends, the LED strip has pre-solder-long wires, so you can easily make two separate lighting tape used directly from the LED strip. This tape does not have connectors, 12mm wide due to two LEDs.

• The product is tested in approved laboratories and the high quality of light meets EU requirements for internal lighting

 

• We recommend additional cooling to the LED strip eg. With an LED profile. In addition, the LED profile is cleaning and protects the LED strip from shocks, dust, etc.

 

• Recommended LED profiles - this ribbon is 8mm wide, ie fits all of our profiles. Our most affordable surface mounted profile is Straight14, who goes well with basic lighting. Also Surface14 Profile installation becomes supercute! The profile corresponding to the sinks are, for example  Career14 and e.g. Bevel-uppo14 profile. From angular Angle14 and Angle16 The profiles also have a neat result with this scoring LED strip.

 

• Suitable transformer - you will need a standard voltage source in addition to the LED tape. If you use the entire 5 meters LED strip then 5 x 20W = 100w, so we recommend this 120W 24V standard voltage source! If you install 2 whole ribbon ribs, ie 10m (10m x 20W/m = 200W), a suitable transformer, for example 250W 24V standard voltage source.

 

• Wireless dimming - the above mentioned 24v basic converters Also visit if you want to dim the ribbon with wireless dimensions like this inexpensive Easy rf with a roller cap and on the receiver. This tape also has a great visit to our RF WiFi series that looks like a regular wall control Surface-mounted wireless glass backing roller control and RF WIFI 12-24V receiver, which allows the wireless controller to control the LED tape.

 

• Dimensioning with a traditional wall dimmer-if you want to dim the ribbon with traditional wall dimensions such as a transistor or triac dimensions, select a triac-dimensioned transformer, for example, for the whole 5m reel 150W 24V triac transformer.

• 5-year manufacturer's warranty (average service life 36000 h)

Model	DF20-24V
Operating voltage	24vdc
Power w/m	20w
Light output, 3000K	~ 1720lm
Light output, 4000K	~ 2090lm
Light output, 6500k	~ 1890lm
Efficiency	90-100 lm/w
Opening angle	128º
Led	Cob
LED/M	scoring
CRI	>90
Reel length	5m
Dimensions (mm)	5000x12x1,6

Conformity Insurance: CE & ROHS

Operating temperature -20º - +45º

The product is manufactured using LEDs that have been tested for 6000h according to LM-80.