6W CCT LED down light 2700-6500K 500lm CRI>90 DW2-06A-RF - EASY RF 2.4G

NEW! tunable white 6W LED down light, where CCT i.e. colour temperature control functions and dimming. High colour rendering performance with CRI >90 and an effective light output of 500lm. Long life of 50 000h. You can enjoy bright natural lighting at 6500K during the day and dim the lights in the evening for a moody warm white 2700K shade.
The luminaire is also adjustable laterally, so you can turn the light in the direction you want. A very low profile design, a mounting depth of about 4cm is sufficient for this luminaire.
The smart lamp is controlled by a handy wireless remote control. K1 wall controller, K2 wall switch,  with remote control, via WiFi or with various wall controllers (to be purchased separately). Find all compatible products in this category. So all you need is a suitable controller and you can control the colour temperature and dimming of the lamp wirelessly.

6W CCT LED down light with colour temperature control

CCT tunable white 6W LED down light EASY RF 2.4G - from the series with a luminous intensity of 500lm. The luminaire has a cct-Colour temperature adjustable LEDs, providing a variety of lighting from warm 2700K white to cool 6500K white and dimming with ease. Includes a transformer as well as a receiver built into the transformer for 2.4G series. We recommend the handy K1 roller control for this luminaire, which you can find in our range in black and in white. The luminaire cannot be dimmed with traditional wall dimmers, but the power supply to the luminaires must be ON/OFF and the luminaire is controlled by its own wireless controller.

This luminaire is compatible with both EASY RF CCT-colour temperature control products as SMART LED 2.4G series products. Connect Smart LED - LED-lamp Smart LED 2.4G WiFi base station, Smart LED 2.4G - remote control, to the wall controller in zone 1, to the wall controller for zone 8 or all the different controls to control the lights. Smart LED 2.4G system can have anywhere from one to thousands of Smart LED -smart bulbs and panel lights, and you can also connect with their own receivers LED-tapes and LED-lamps, such as E27 and E14 - smart bulbs. Linked lights can be divided into four or eight subgroups, this smart light supports both. Zones can be e.g. kitchen, living room, bedroom or separately ceiling lights for day lighting and mood lights for evening lighting.

Do not disturb mode is possible for luminaires with transformer V2.0 (not possible for transformers with V1.0)

How to turn on Do Not Disturb

It can be activated or deactivated with a remote control/4-part wall switch with ON and OFF buttons.

Switch on "Do Not Disturb" mode (widely used in areas with frequent power cuts to save energy)

Press the "OFF" button three times within three seconds and press the "ON" button three times. Activation is successful when the LED light flashes rapidly four times.

Note: Do Not Disturb mode is activated

When the light is OFF (Example: Use an application or remote control to turn off the light) The light is ON when you turn off and on the power once.

When the light is ON The light is OFF when you turn the power off and on again (the user must turn the power off and on twice to activate the light or use an application/remote control to activate the light).

Turn off "Do Not Disturb"

Press the "ON" button three times within three seconds and press the "OFF" button three times. The mode will be successfully closed when the LED light flashes slowly four times.

Note: The light will always remain in the "ON" mode if you turn the power on and off once after the user has closed the "Do Not Disturb" mode.

Smart light specifications