RGBW LED strip 5m - 24W/m 24V (12W/m RGB+12W/m W 60+60led/m), CRI>90, IP20

RGBW LED strip 24W 24V 5m in a reel, high quality and high efficiency! IP20, for indoor use. Very efficient RGBW-strip for restaurants, event lighting, home ambient lighting, etc. LEDs RGBW-in a strip on separate chips, alternating. 60 units per metre 12W/m RGB-LEDs and 60 12W/m monochrome white LEDs with CRI>90, for a total of 120 LEDs per metre. At both ends, pre-soldered wires of about 1m length. Made in Europe, good availability - also larger batches with a delivery time of about 2 weeks!
Available in both warm white LED 3000K and 4000K neutral white. 10mm wide special strip, i.e. for this! RGBW-not suitable for this ribbon RGBW connectors intended for 12mm ribbon.
 

RGBW 24W/m 24V LED strip - very efficient and high quality!

Powerful professional level 24W/m 24V RGBW LED strip, i.e. multicolour LED strip. LED-With 60+60pcs/m of alternating red, blue, green and white LEDs on one chip and white on another chip, millions of different colours can be mixed. RGBW In addition to the multicolour LEDs, the strip also contains a white LED, which you can use directly for easy basic lighting. You can choose either a warm white or the most neutral white shade for the white LED.

Made in Europe. If the strip is not in stock, delivery time is quite fast, usually about 2 weeks.

RGBW LED-The strip is controlled by various light control products. The easiest solution is Our RF WiFi series RGBW compatible receiver combined with for example a remote control, with pre-set programmes for colour changing shades, a tilt wheel for adjusting the light tone and dimming. In addition RGBW LED-strips can be controlled by, for example. DMX decoders.

In addition, our new Smart LED 2.4G is the affordable receiver and remote control and wall controller RGBW adjustment.

For example, if you are using the whole 5m tape for one object, the transformer can be used for example. 150W 24V constant voltage transformer.

• Luminous flux red: 102 lm/m
• Luminous flux green: 253 lm/m
• Luminous flux blue: 89 lm/m
• White: (1168-1224lm/m depending on the option)

 

You can choose between two options for the white hue: a warm white hue and a neutral white hue. 

Warm white (3000K) 1168 lm/m

neutral white (4000K) 1224 lm/m

Applications RGBW LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGBW LED-Tape specifications

• Flexible drying space RGBW LED strip i.e. multi-coloured LED strip
• Protection class: IP20
• Voltage: 24V DC DC, 24V DC DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 24W/metre
• Width: 10 mm (special width, i.e. not suitable for this ribbon) RGBW connectors, if you cut the tape, you can solder new wires to it)
• Height: 2.2 mm
• Colour: RGBW Multicolour ribbon
• White colour temperature selectable either 3000K or 4000K
• Colour rendering performance (white): CRI>90
• LED Type: 5050 RGBW SMD
• 120 led/m
• LED opening angle: 120°
• Dimmable and RGBW controllable

RGBW-Other information on the tape

• Operating environment: -25°...60°C
• strip can be cut off every 10 cm (6 LEDs)
• 3M double-sided adhesive tape on the back of the strip, which sticks to almost anything
• Flexible, but not lateral
• Comes with a 10cm extension piece to extend the tape.

RGBW light control:

• Light control requires RGBW-A controller, such as the RF WiFi series receiver and controller.
• RGBW-controls, see here
• Colour options RGBW in the driver information. The main colours are red, green, blue and white, with the possibility of mixing these with a wide range of colours. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, but if necessary RGBW with an amplifier the length of the installations can be increased without limit or if e.g. 7m RGBW-tape is powered from both ends, in which case power supply is in the middle with wires to each end. It is also possible to install e.g. 10 lengths, with each end having its own 100W 24V transformers and receiverswhich work in sync and the result is good.