15W/m 24V Cob LED light strip 5m, 1400lm/m, CRI> 90, IP20 544LED/M

COB LED Lighting Ribbon New! A brilliant value for money, effectively illuminating 15W/m 24V COB LED light strip with high CRI> 90 and about ~ 1400lm/m. The IP20 COB LED strip suitable for indoor use is 8mm wide and 5m in length, with 100cm wanderings soldered at each end of the tape. The color of the light is as you choose either Warm white 3000K, neutral white 4000K or cold white 6500k.
The bottom of the LED tape has a 3M tape to attach the tape to its substrate and the LED light strip can be cut to a suitable size every 5cm. Great for a variety of lighting purposes in dry interiors such as wall highlighting, bookshelves, railing or bedroom behind the bed - is also suitable for use in the kitchen.
 

Affordable pointless 15W/m 24V COB LED light strip with good light output ~ 1400lm/m

The LED tape can be installed very close to the roof or wall surface or diffuser, and the light of the individual LEDs on the individual LEDs is not detected, but the light is always flat and pleasant. The LED light tape can be reduced/cut every 2.94cm at intervals at the copper spaces. At both ends, the LED strip has pre-solder-long wires, so you can easily make two separate lighting tape used directly from the LED strip. In addition, you can use 8mm COB band connectors on this tape, ie Slim 8mm Cob Ribbon-Tape connector To connect two Cob LEDs to each other, slim 8mm COB Ribbon Cables connector To connect the new supply cable to the tape.

• The product is tested in approved laboratories and the high quality of light meets EU requirements for internal lighting

 

• We recommend additional cooling to the LED strip eg. With an LED profile. In addition, the LED profile is cleaning and protects the LED strip from shocks, dust, etc.

 

• Recommended LED profiles - this ribbon is 8mm wide, ie fits all of our profiles. Our most affordable surface mounted profile is 14.4mm x 7mm size Straight12, who goes well with basic lighting. Also Surface 10 with profile and even the smallest Mini8 With our profile, installation becomes superb! The profile corresponding to the sinking is the most advantageous basic profile Straight-Uppo12 and e.g. Groove10 profile. From angular PT45 with profile, Cabinet12 and Corner10 The profiles will also have a perfectly smooth and neat result with this scoring LED strip.

 

• Suitable transformer - you will need a standard voltage source in addition to the LED tape. If you use the entire 5 meters of LED tape then 5 x 15W = 75W, ie we recommend this 120W 24V standard voltage source! If you install 2 whole ribbon ribs, ie 10m (10m x 15W/m = 150W), a suitable transformer for example 180W 24V standard voltage source.

 

• Wireless dimming - the above mentioned 24v basic converters Also visit if you want to dim the ribbon with wireless dimensions like this inexpensive Easy rf with a roller cap and on the receiver. This tape also has a great visit to our RF WiFi series that looks like a regular wall control Surface-mounted wireless glass backing roller control and RF WIFI 12-24V receiver, which allows the wireless controller to control the LED tape.

 

• Dimensioning with a traditional wall dimmer-if you want to dim the ribbon with traditional wall dimensions such as a transistor or triac dimensions, select a triac-dimensioned transformer, for example, for the whole 5m reel 100W 24V triac transformer.

• 3-year manufacturer's warranty (average lifetime 36000 h)

Model	DF15-24V
Operating voltage	24vdc
Power w/m	15w
Light output, 3000K	~ 1350lm
Light output, 4000K	~ 1470lm
Light output, 6500k	~ 1500lm
Efficiency	90-100 lm/w
Opening angle	140º
Led	Cob
LED/M	scoring
CRI	>90
Reel length	5m
Dimensions (mm)	5000x8x1,6

Conformity Insurance: CE & ROHS

Operating temperature -20º - +45º

The product is manufactured using LEDs that have been tested for 6000h according to LM-80.