9.6W/m 24v Star LED light strip 5m, 1000lm/m, CRI> 80, 128LED/M, IP20

Beautiful novelty! The new Star LED light strip 180º wide is a stunning 9.6W/m 24V LED strip with dense LEDs 128 LED/meter, CRI> 80 and about ~ 1000lm/m. The IP20 LED strip suitable for indoor use is 8mm width and 5m in length, and 100cm of the connection cables sold at each end of the tape. The color of the light is as you choose either Warm white 3000K, neutral white 4000K or cold white 6500k. The bottom of the LED tape has a 3M tape to attach the tape to its substrate and the LED can be cut to a suitable size at 6.25cm intervals. Great for a variety of lighting purposes in dry interiors. At best, when you wish a wide light opening angle, for example in indirect lighting on the lip, etc.

Affordable Star 9.6W/M 24V LED with dense LED 128LED/M and with good light output ~ 1000lm/m

The LED tape can be installed very close to the roof or wall surface or diffuser, and the "point" lightly radiated light on the individual LED LEDs is no longer detected, but the light is smooth and comfortable. Cut can be cut every 6.25cm. The LED tape has pre-solder wiring at both ends. In addition, you can use 8mm strips in this ribbon, ie Slim 8mm ribbon-ribbon connector To connect two LEDs to each other, Slim 8mm tape cables connector To connect the new feed cable to the tape.

• The product is tested in approved laboratories and the high quality of light meets EU requirements for internal lighting

• We recommend additional cooling to the LED strip eg. With an LED profile.

  Recommended LED profiles - This LED is 8mm wide, ie fits all of our profiles. Our most affordable surface mounted profile is 14.4mm x 7mm size Straight12, who goes well with basic lighting. If you want not to see LED points then select Mini10 A profile of 12 x 12mm. The profiles of the sinking installation are the most affordable basic profile Straight-Uppo12 and the scoring result is achieved Mini-uppo10 with a profile. From angular PT45 with profile There will also be a perfectly smooth and neat result with this LED.

• Suitable transformer - you need a 24V standard voltage source in addition to the LED tape. If you use the entire 5 meters LED strip then 5 x 9.6W = 48W, ie we recommend this 75W 24V standard voltage source! If you install 2 whole ribbon ribs, ie 10m (10m x 9.6W/m = 96W), there is a suitable transformer, for example 120W 24V standard voltage source.
• Wireless dimming - the above mentioned 24v basic converters Also visit if you want to dim the ribbon with wireless dimensions like this inexpensive Easy rf with a roller cap and on the receiver. This LED ribbon also has a great visit to our RF WiFi series that looks like a regular wall control Surface-mounted wireless glass backing roller control and RF WIFI 12-24V receiver, which allows the wireless controller to control the LED tape.
• Dimensioning with a traditional wall dimmer-if you want to dim the LED strip with traditional wall dimensions, such as a transistor or triac dimensions, select a triac-dimensional transformer, for example, for the whole 5m reel 75W 24V triac transformer.

• 3-year manufacturer's warranty (average lifetime 36000 h)

LED tape data

Model	DF128-24V
Operating voltage	24vdc
Power w/m	9.6W
Light output, 3000K	~ 960lm
Light output, 4000K	~ 1040lm
Light output, 6500k	~ 1080lm
Efficiency	105-114 lm/w
Opening angle	120º
Led	Star
LED/M	128
CRI	>80
Reel length	5m
Dimensions (mm)	5000x8x1,2

Conformity Insurance: CE & ROHS

Operating temperature -20º - +45º

LED tape made using LEDs that have been tested for 6000h according to LM-80.