10W/m 24v Dispatch 1LED/CUT COB LED LED ROOM 5M, 600LM/M CRI> 90 IP20 544LED/M

1Led/Cut, or in extremes, at short intervals (3.68mm) 10W/m 24V COB LED light with high CRI> 90 and light output about ~ 600lm/m. The IP20 COB LED strip suitable for indoor use is 8mm wide and 5m in length, with a single-meter-long connection width at each end of the tape. Particularly suitable when you need to get accurate dimensions with an LED strip, for example in luminaire or other resolution. You can choose the color of the LED light tape light for two options: either Warm white 3000K or neutral white 4000K
At the bottom of the LED light strip, there is a durable 3M tape to attach the tape to its substrate and the LED light strip can be easily cut off with scissors to a suitable length at only a few millimeters (3.68mm). This LED light tape is very versatile and is also great for a variety of lighting purposes in dry interiors such as wall highlighting, bookshelves, stairs handrail or bedroom behind the bed headboard - is also suitable for use in intermediate lighting and laundry lighting or indirectly on top of the kitchen cabinets.

1LED/CUT 10W/M 24V COB LED LIGHT Tape with good light output ~ 600lm/m

The pointless COB LED light tape can be installed very close to the roof or wall surface or diffuser, and the light of the individual LEDs on the individual LEDs is not detected, but the light is always flat and pleasant. The LED light tape can only be reduced/cut at intervals of a few millimeters, ie every 3.68mm at the copper plots at scissors. At both ends, the LED strip has pre-solder-long wires, so you can easily make two separate lighting tape used directly from the LED strip.

• The product is tested in approved laboratories and the high quality of light meets EU requirements for internal lighting

 

• We recommend additional cooling to the LED strip eg. With an LED profile. In addition, the LED profile is cleaning and protects the LED strip from shocks, dust, etc.

 

• Recommended LED profiles - this ribbon is 8mm wide ie fits all on our profiles. Our most affordable surface mounted profile is 14.4mm x 7mm size Straight12, who goes well with basic lighting. Also Surface 10 with profile and even the smallest Mini8 With our profile, installation becomes superb! The profile corresponding to the sinking is the most advantageous basic profile Straight-Uppo12 and e.g. Groove10 profile. From angular PT45 with profile, Cabinet12 and Corner10 The profiles will also have a perfectly smooth and neat result with this scoring LED strip.

 

• Suitable transformer - you will need a standard voltage source in addition to the LED tape. If you use the entire 5 meters of LED tape then 5 x 910W = 50W, ie we recommend this 75W 24V standard voltage source! If you install 2 whole ribbon ribs, ie 10m (10m x 10W/m = 100W), a suitable transformer for example 120W 24V standard voltage source.

 

• Wireless dimming - the above mentioned 24v basic converters Also visit if you want to dim the ribbon with wireless dimensions like this inexpensive Easy rf with a roller cap and on the receiver. This tape also has a great visit to our RF WiFi series that looks like a regular wall control Surface-mounted wireless glass backing roller control and RF WIFI 12-24V receiver, which allows the wireless controller to control the LED tape.

 

• Dimming with a traditional wall dimmer-if you want to dim the ribbon with traditional wall dimensions such as a transistor or triac dimensions, select a triac-dimensioned transformer, for example for a 3M LED tape 40W 24V triac dimmable transformer and size 5m for reel 75W 24V triac transformer.

• 3-year manufacturer's warranty (average lifetime 36000 h)

Model	Df6n
Operating voltage	24vdc
Power w/m	910W
Light output, 3000K	~ 550lm
Light output, 4000K	~ 600lm
Efficiency	55-60 lm/w
Opening angle	140º
Led	Cob
LED/M	544led/m, pointless
CRI	>90
Reel length	5m
Dimensions (mm)	5000x8x1,8

Conformity Insurance: CE & ROHS

Operating temperature -20º - +45º

The product is manufactured using LEDs that have been tested for 6000h according to LM-80.