RGB + CCT - 5 in 1 LED strip 5m - 20W/m 24V

RGB + CCT LED strip 20W 24V 5m in a reel, high quality and efficient multicolour riled + colour temperature control for white in the same reel! IP20, for indoor use. Highly efficient RGB + CCT-strip for restaurants, event lighting, home mood lighting, etc. LEDs RGB + CCT-60 LEDs per metre in a single chip. Each end pre-soldered with about 10cm wires!
 

RGB + CCT LED strip - very efficient and high quality! Multicolour LEDs i.e. RGB and CCT-eli tunable white LEDs in one strip 5 in 1

Powerful professional level 20W/m 24V RGB + CCT LED strip, i.e. multicolour LED strip with also colour temperature control in the same. LED-Ribbon with red, blue, green and warm white/cold white LEDs in one chip, from which millions of different shades of colour can be mixed in both colours and shades of white. RGB + CCT In addition to the multicolour LEDs, the strip also includes white LEDs, which allow you to create basic lighting directly with easy colour temperature control. You can choose to use the white LED in either a warm white 2500K or the most neutral white 6000K or any shade in between.

RGBW LED-The strip is controlled by a variety of light control products. The easiest solution is Our 2.4G series  5 in1 receiver combined with for example remote control or 1-piece wall controller or both 8-piece wall controller with pre-set programs for colour changing shades, a tilt wheel for adjusting the light tone and dimming. Also RGB + CCT LED-strips can be controlled by, for example. DMX decoders.

In addition, our Zigbee range includes receiver and remote control and a compact wall-mounted controller RGB + CCT for adjustment.

Also available in the RF WiFi series receiver and remote control 5 in 1 i.e. RGB + CCT for tapes.

For example, if you use the whole 5m tape for one destination, you can use a transformer such as. 100W 24V constant voltage transformer.

• Red: 108lm/m
• Green: 245.58lm/m
• Blue: 65.749lm/m
• White 2700-6000K: 311.68/lm/m

Applications RGB + CCT LED-tape

• Nightclubs
• Restaurants
• Shopping centres
• Homes
• Indirect mood lighting, etc.

RGB + CCT LED-tape specifications

• Flexible drying space RGB + CCT LED strip i.e. multi-coloured LED strip, with additional colour temperature control
• Protection class: IP20
• Voltage: 24V DC DC, 24V DC DC, so use 24V standard power supplies
• Full reel length: 5 meters
• Power: 20W/metre
• Width: 12 mm
• Height: 2.2 mm
• Shade: RGB + CCT multicolour ribbon and tunable white
• LED type: 5050 RGBW SMD
• 60 led/m
• LED opening angle: 120°
• Dimmable and RGB + CCT controllable

RGB + CCT-Other information on the tape

• Operating environment: -25°...40°C
• strip can be cut off every 10 cm (6 LEDs)
• On the back of the tape, 3M double-sided tape that sticks to almost anything
• Flexible, but not lateral
• 3 year guarantee

RGBW +CCT light control:

• Light control requires RGBW-The lights require a controller, for example a 2.4G series receiver and controller. All our 2.4G series controllers work with this tape!
• Color options RGB + CCT in the driver data. The main colours are red, green, blue and white and in addition to these you can get a mix of several colours and a colour temperature control for the white colour. There is a very wide range of programmes. From calmer to faster. Brightness and speed can be adjusted.
• max. 5m traction LED-tape, if e.g. 7m RGBW-tape is fed with power from both ends, in which case power supply is in the middle with wires to each end. It can also be installed so that e.g. 10 lengths, with each end having its own 100W 24V transformers and receiverswhich work in sync and the result is good.